| Slant Six Forum https://slantsix.org/forum/ |
|
| head porting https://slantsix.org/forum/viewtopic.php?t=8457 |
Page 1 of 1 |
| Author: | redworm67 [ Wed Feb 18, 2004 1:34 pm ] |
| Post subject: | head porting |
are any templates or guidelines available for porting..i have done many v-8 heads,and generally use at least a paper template for some general guidlines.i know there is a bit of magic to it,but im sure a lot of people could use some help.anyone? |
|
| Author: | '74 Sport [ Wed Feb 18, 2004 2:21 pm ] |
| Post subject: | |
Use the gasket that will be installed. Mock it up temporarily and scribe inside the gasket with a scratch awl, or mark it with machinists paint. Work to those lines, but check several times along the way. Jerry |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|