www.sivalves.com
about $10 apiece stainless and you can use the og retainer
| Slant Six Forum https://slantsix.org/forum/ |
|
| Oversized Valves? https://slantsix.org/forum/viewtopic.php?t=8690 |
Page 1 of 1 |
| Author: | myles [ Thu Mar 11, 2004 5:33 pm ] |
| Post subject: | Oversized Valves? |
Anyone know where to get oversized 1.44 exhaust valves? I found 1.70 intakes on the mopar site, but no exhaust. |
|
| Author: | Matadem [ Thu Mar 11, 2004 7:50 pm ] |
| Post subject: | |
www.sivalves.com about $10 apiece stainless and you can use the og retainer
|
|
| Author: | myles [ Fri Mar 12, 2004 9:41 am ] |
| Post subject: | ty |
Thank You (had not had my coffe yet.) |
|
| Author: | Pyper6970 [ Fri Mar 12, 2004 2:20 pm ] |
| Post subject: | |
I have the Si 1.70/1.44 valves. Woke up my motor |
|
| Author: | Rick Covalt [ Sat Mar 13, 2004 3:26 pm ] |
| Post subject: | Part Numbers |
Do you have their part numbers for the oversize valves? or are these special order items only? Thanks, Rick |
|
| Author: | Slant Cecil [ Sun Mar 14, 2004 2:57 am ] |
| Post subject: | |
Rick, the O.S. valves are listed in Si's Portflow/Quickflow series. Part#s SEV-2309-S and SEV-2310-S. Cecil |
|
| Author: | Michael_Cuda [ Sun Mar 14, 2004 4:33 am ] |
| Post subject: | |
What is the stock valves size? |
|
| Author: | Slant Cecil [ Sun Mar 14, 2004 4:49 am ] |
| Post subject: | |
1.62/1.36 Cecil |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|