| Slant Six Forum https://slantsix.org/forum/ |
|
| Valiant Wheel base ? https://slantsix.org/forum/viewtopic.php?t=8707 |
Page 1 of 1 |
| Author: | Dave M [ Sun Mar 14, 2004 9:05 am ] |
| Post subject: | Valiant Wheel base ? |
Does anyone out thier know the wheel base of a 1965 Plymouth Valiant Wagon ? All my books are to new for this information. I have tried the tape measure trick and came up with 111" How close am I ?? thanks |
|
| Author: | Dart270 [ Sun Mar 14, 2004 9:56 am ] |
| Post subject: | |
It's either 106" or 106.5" for that car. Darts (non wagons) are 111". Lou |
|
| Author: | Seis Inclinado [ Sun Mar 14, 2004 5:00 pm ] |
| Post subject: | |
North American versions The various North American models were: Year Model Wheelbase 1960-62 Lancer and Valiant 106.5" 1963-66 Valiant, Barracuda, Dart Wagon 106" (except Canada) 1963-76 Dart (except wagon) 111" 1974-76 Valiant 111" 1967-73 Valiant 108" 1967-69 Barracuda 108" 1970-76 Duster 108" 1971-72 Demon 108" 1973-76 Dart Sport 108" Data from the following link: http://www.valiant.org/abodies.html |
|
| Author: | typhoon [ Sun Mar 14, 2004 11:06 pm ] |
| Post subject: | |
Just for curiosity value, our(Australian) later model Valiants had 3 different wheelbases, the earlier ones may be different, but I am not into them. Charger was 105", sedan, utility, panelvan and wagon were 111" and the hardtop was 115". The hardtop also had reeeally long quarter panels and rear overhang, while the Charger had a much shorter(2") quarter panel and overhang than a sedan. Regards, Andrew. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|