Well I got some pics of the ole girl up on the website. Just go to www.drakecoatings.com and click the slant 6 tab at the top. You might have to hit refresh if you have been to the site before.

I am keeping the gas pedal but the rare factory floor mats might have to be scarificed!

Plans are to build an extremely low $$$ boosted motor. After I received 41 emails from various people off the site I think there is plenty of interest in this and would benefit quite a few people.

Right now I am planning to start first with a turbo build using a stock cast iron exhaust manifold and adpating the turbo flange to it. I plan to get the set-up running as cheaply as possible and demonstrate the performance and then start upgrading certain items to show the effect. A running total of money spent will be advertised to give you an idea on what it would cost you to duplicate.

Currently I have $1500 in the car and $45 for a driveshaft U-joint that was bad.(old style)

I am in process of looking for a used CS that would work on the slant and once I find one of those I will starting putting that together as well.

Plans for project Cornbread are to race it at the slant 6 races this summner with our old family friend "Bob the Yankee" driving. When he can not make it down from the frozen north subsitute drivers will be used!

We will be making some shakedown runs on the current set-up this weekend so look for updates on the "as is" performance on Monday!

As a past slant 6 champion says "Stay tuned!".

Tom

_________________
Nitrous cars are like old men on Viagra. Once the bottle is empty they are useless.
FJD

Hmmmm, you got 41 e-mails, but posted this 5 days ago with no replies.

You may as well tell everyone now Tom that 39 of them were from your Mom.

In all seriousness, what's your baseline run? Enquiring minds wanna know.

_________________
Official Cookie and Mater Tormentor.

Cornbread is good down here Bagel aint like all yall yankees eat. So my project is going to be pinto beans. Aint nothing like cornbread and pinto beans maybe with a little oinion and boiled cabbage. Possum

Ps My base line I hope will be Fastest A Body in Slant six racing . Lets See









Bagels Juiced Im Bamboozled

Hmmmm, no updates yet? Must be busy filming 'Deliverance II'.

_________________
Official Cookie and Mater Tormentor.

Nope getting the parts I need Got the pistons the rods and the cam . Just need one more piece and it will go to Gary . Thanks your racing friend Possum










Bagels Juiced Im Bamboozled

I checked out their website and it looks like Project Cornbread is doing pretty well for itself. Tom won his class three times in a row, so the car is pretty consistent. Best ET so far in the 1/8th is 10.85.

_________________
Rob

I’m Mater
The Kentucky Poser

1/8th or 1/4? My junk runs 10.58's in the 1/8th.

_________________
'72 Duster 198 stock cam, 3:23's Hookers on jack stands for 8 years in the driveway
'79 Maxivan 360 Offy Qjet Comp RV cam/rusting in the driveway.
93 D350 160HP Cummins Auto Dually Clubcab needs a injector pump
2005 Golden Couch Buick

Can somebody tell me what I'm doing wrong here? I went to Tom's site to see what's happening and the Slant stuff is gone.

_________________
Official Cookie and Mater Tormentor.

I can't see it either.

The website is totally different. Maybe, they just haven't had a chance to add the racing stuff, to the new site.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

Thanks guys, glad it's not just me. Thought I was losing it for a minute.

_________________
Official Cookie and Mater Tormentor.

I emailed Tom and asked what was up.

Business is growing and he's looking at some big contracts. He changed the website to make it more professional for that reason.

He didn't mention if he would be putting the racing stuff back up, but I kinda figure maybe not.

His email was pretty short. I don't think he has much time for much other than the powder coating business.

_________________
Rob

I’m Mater
The Kentucky Poser

Good for Tom. You have to take care of business when it's hot. Always time for toys later.

_________________
Official Cookie and Mater Tormentor.