| Slant Six Forum https://slantsix.org/forum/ |
|
| Anybody run a Holley 2305? https://slantsix.org/forum/viewtopic.php?t=9056 |
Page 1 of 1 |
| Author: | Marc [ Fri Apr 16, 2004 8:56 am ] |
| Post subject: | Anybody run a Holley 2305? |
The Holley 2305 looks like it would be a good carb on a slant, especially for people like me who have a lot of Holley tuning parts. I haven't been able to find any info on it. Does it use the same metering blocks and bowl as the 2300/4150/4160? Anybody know where I can get one? |
|
| Author: | mnecaise [ Mon Apr 19, 2004 9:32 am ] |
| Post subject: | |
I believe the metering block is different; but, most of the other parts exchange with a 2300. |
|
| Author: | DusterIdiot [ Mon Apr 19, 2004 11:53 am ] |
| Post subject: | Reed... |
I think board member Reed Speir a while back wanted to try a 2305 progressive, but never got around to it, somewhere I had heard that Holley was thinking of dropping them from produciton since they weren't selling that many anymore... -D.Idiot |
|
| Author: | kesteb [ Mon Apr 19, 2004 4:22 pm ] |
| Post subject: | |
The 2305 is basically half of a 4150 cut lengthwise. It has a front primary and a rear secondary with mechanical linkage. The fuel bowl and metering plate is mounted on the side of the carb not the front like the 2300. One jet feeds the primary and the other feeds the secondary. Holley discontinued them several years ago. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|