| Slant Six Forum https://slantsix.org/forum/ |
|
| bell housing for 833 OD trans. https://slantsix.org/forum/viewtopic.php?t=9798 |
Page 1 of 1 |
| Author: | snorklewurst [ Mon Jul 12, 2004 7:52 pm ] |
| Post subject: | bell housing for 833 OD trans. |
do the bell housings from 8's bolt up to 225 6's? |
|
| Author: | volaredon [ Mon Jul 12, 2004 9:26 pm ] |
| Post subject: | |
NO!!! |
|
| Author: | andyf [ Wed Jul 14, 2004 8:25 pm ] |
| Post subject: | |
Only if you use an adapter that converts from /6 to SB pattern. Then you could use a SB scattershield. |
|
| Author: | volaredon [ Thu Jul 15, 2004 4:19 pm ] |
| Post subject: | |
Do you HAVE an A833OD bellhousing for a V8 that you dont need/cant use?? I NEED IT! |
|
| Author: | snorklewurst [ Thu Jul 15, 2004 5:16 pm ] |
| Post subject: | |
I believe there is one on ebay right now under mopar bellhousing. I need one for a 225. |
|
| Author: | volaredon [ Mon Jul 19, 2004 3:39 pm ] |
| Post subject: | |
Check out sl6.com. Someone had one for free today, listed in the parts section. Last couple Ive shipped only cost about $12. it sounds as if he has the clutch, flywheel and all. (may be a little more with all the extras) |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|