Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Wed Nov 27, 2024 11:43 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Motor Mount question
PostPosted: Mon Sep 04, 2006 5:39 pm 
Offline
TBI Slant 6

Joined: Sun Jan 19, 2003 10:50 pm
Posts: 169
Car Model:
Somewhere along the line I heard that the early A-body convertibles had different motor mounts than the hard top cars.Is this true?

If so anybody know the difference between the two.

Thanks in advance.

JZ


Top
   
 Post subject:
PostPosted: Mon Sep 04, 2006 6:38 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
Yep, the '63-'66 A-bodies had a different RH (passenger) engine mount. It is physically identical to the non-convertible item, dried-up on the aftermarket years ago, and plenty of folks use the regular RH mount on convertibles without any problem. I don't know for sure, but I suspect the special convertible mount was made of a different (harder or softer) rubber to damp out some vibratory noise that occurred with the convertible and not with the closed cars. Anyhow, the forthcoming urethane mounts from Imperial Services will be better than any of the factory mounts for the '62-'66 cars, including convertibles.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Mon Sep 04, 2006 8:51 pm 
Offline
TBI Slant 6

Joined: Sun Jan 19, 2003 10:50 pm
Posts: 169
Car Model:
Thanks Dan.

I just put some new mounts on the Dart (conv)for the umpteenth time.The motor seems a little low on the right side.Seems like the motor mount on that side could be a little thicker,raising the motor a scosh.


Can you adjust the height of the motor or is it a fixed height?

Waiting on Imperial mounts myself.

Thanks
JZ


Top
   
 Post subject:
PostPosted: Mon Sep 04, 2006 9:22 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
You can shim the motor mounts with...just about anything, really! A cut-to-size wooden shim would hold up longer, probably, than these cruddy Indian-made (or Indonesian, Chinese, etc.) mounts that are about all we can buy nowtimes. I think Imperial are going to do well with their new mounts when they get them on the market.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Tue Sep 05, 2006 6:28 am 
Offline
Turbo EFI
User avatar

Joined: Tue Feb 18, 2003 7:34 am
Posts: 2479
Location: Lubbock, Texas
Car Model: 1964 Plymouth Valiant V200 Sedan
Johnny, you might have a shorter motor mount intended for a V8, or a cruddily-made one as Dan mentioned. I had one once that let the oil pan juuuuusssttt sit on the K-member. Vibration City. The right mount fixed it up!

_________________
"When you find a big kettle of crazy, it's best not to stir it." - Pointy-haired Boss

1964 Valiant V200, 225/Pushbutton 904
BBD, CAI, HEI, LBP, AC, AM/FM/USB, EIEIO


Top
   
 Post subject:
PostPosted: Tue Sep 05, 2006 8:35 am 
Offline
TBI Slant 6

Joined: Sun Jan 19, 2003 10:50 pm
Posts: 169
Car Model:
Santa maria!!!!!

I am going to have to check that out,as I am having a noise(knock) coming from the front right somewhare on hard acceleration.

Thanks slantvaliant.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Google [Bot], Semrush [Bot] and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited