Just by looking at it, my guess is to take off the dust cover and then remove it with a big socket. Is now the time to possibly replace the wheel bearings? Will this procedure be more or less difficult than the rear drum shoe replacement? Thanks for ANY help.

Geoff

_________________
Geo
1964 Dodge Dart GT
Ebay Purchase - $1569.00
Rebuilt transmission - $1700.00
PST Brake and suspension rebuild/shocks - $600
Fact that I have a long way to go - Priceless
This is begining to hurt!

About the same as the rear (and you don't have to worry about the parking brake linkage)

If the bearings are good, you don't need to replace them.

Just clean and relube and replace the inner grease seal.

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

You should not need a socket to take the nut off, just a large pliers.

_________________