hey there

I have an A833 and since I'll be assembling all the car up again, I was wondering if anyone is using a remote reservoir hydro TOB on a stock 10" HD slant six B&B pressure plate. I got mine thanks to rock, ! and now I'm trying to figure out if it's doable with major effort (the hydro TOB thing)

If you have PN's and brands, or just pictures and advise, I'd greatly appreciate your input

_________________
Juan Ignacio Caino

Please use e-mail button istead of PM'ing. I do log in sometimes but I'll be answering quicker thru e-mail.

I know Lou has one in his '64. I think it is from Keisler.

_________________
Official Cookie and Mater Tormentor.

I am using the McLeod TOB on my 64 Dart. Bought it from PAW about 5 yrs ago and used with a Wilwood MC from Summit. No problems yet. It has worked on the Mopar 10" PP and recently on a McLeod 9" dual friction setup.

Lou

_________________
Home of Slant6-powered fun machines since 1988

Hi I was looking into that the other day and i found one here at my work (mopar parts counter) that fits a jeep wrangler it looks like it would work if you make a bracket down on the bell housing it is flush mount on the fire wall ( the kit comes with master cylinder slave cyl. and the line also comes pre bled) i was just throwing this out their part # 52107652ac and it lists for $252.00 ( i was thinking this might help cuz it is readily available at most mopar dealers) o also it has some kind of sensor. Also i was just looking at an older wrangler and it looks like they made one without a sensor (in the picture it looks like the one listed above I don't have it in stock so i cant pull it out to look at it but it is cheaper so i'm thinking it does not have the sensor) part # 52104113 and it lists for $179.00 I hope this helps

thanks people

_________________
Juan Ignacio Caino

Please use e-mail button istead of PM'ing. I do log in sometimes but I'll be answering quicker thru e-mail.