Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Nov 28, 2024 2:28 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Voltage Regulater?
PostPosted: Fri Jan 12, 2007 9:52 am 
Offline
EFI Slant 6
User avatar

Joined: Thu Feb 24, 2005 7:04 am
Posts: 269
Location: harford co. maryland
Car Model:
I was wondering if anyone could tell me if a used voltage regulator that was pulled off a car previously can go bad from sitting cuz my regulator went up and i tried 3 different regulators i had sitting around that worked when pulled from the car and they are all still making my ampmeter go all over the place I did go out and get a new one and all is good now


Top
   
 Post subject: Re: Voltage Regulater?
PostPosted: Fri Jan 12, 2007 10:37 am 
Offline
Turbo Slant 6
User avatar

Joined: Mon Apr 04, 2005 12:22 pm
Posts: 580
Location: Austin Texas
Car Model:
Quote:
I was wondering if anyone could tell me if a used voltage regulator that was pulled off a car previously can go bad from sitting cuz my regulator went up and i tried 3 different regulators i had sitting around that worked when pulled from the car and they are all still making my ampmeter go all over the place I did go out and get a new one and all is good now
Mechanical or electronic?

In either case, the short answer is "yes" they can go bad from sitting. Mechanical regulators can corrode and the contacts get inconsistent, electronic ones can have capacitors drift value and/or go bad, but that can also happen with them while being used.

IF you're having the exact same symptom after trying several, I'd look real hard at other things like connections and how good the ground (chassis) connection to the regulator is.

_________________
Image


Top
   
 Post subject:
PostPosted: Fri Jan 12, 2007 11:41 am 
Offline
EFI Slant 6
User avatar

Joined: Thu Feb 24, 2005 7:04 am
Posts: 269
Location: harford co. maryland
Car Model:
Well it is working fine now with the new regulator but I did look at all the wiring and I found a wire out in the open not hooked to anything I was going to chase it back in the harness to see where it went but if I can get my camera to work with my comp i will post a pic

thanks man


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited