Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 21, 2026 8:09 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Thu Jan 25, 2007 5:18 am 
Offline
EFI Slant 6
User avatar

Joined: Fri Jan 05, 2007 2:57 pm
Posts: 355
Location: Florida
Car Model:
Looking for makers for my 225/ project thanks for any help you can give me http://www.stormcomm.net/donsduster.htm

_________________
'72 Image Duster /6 with turbo build up
'03 Ram 2500 4x4 w/HEMI 5sp 4:10 posi
My Twister Page


Top
   
 Post subject:
PostPosted: Thu Jan 25, 2007 12:49 pm 
Offline
TBI Slant 6
User avatar

Joined: Tue Jan 28, 2003 11:50 am
Posts: 158
Car Model:
cox bros

about $1000 a set

_________________
Image

http://www.cardomain.com/id/lncognito


Top
   
 Post subject:
PostPosted: Thu Jan 25, 2007 4:14 pm 
Offline
SL6 Racer

Joined: Sun Nov 10, 2002 8:49 pm
Posts: 126
Location: Longview Washington
Car Model:
Last set I bought was from Cunningham $1100.00
Any rod any lenght steel or titanium


Top
   
 Post subject:
PostPosted: Thu Jan 25, 2007 4:40 pm 
Offline
SSRN National Champion
User avatar

Joined: Thu Oct 31, 2002 3:56 pm
Posts: 1967
Location: Dalton, GA
Car Model:
Is this a bat out of hell Slant drag car if not why do you want custom rods. Thanks Ron Parker :D











Bagels On Juice Im On Boost


Top
   
 Post subject:
PostPosted: Tue Jan 30, 2007 3:04 am 
Offline
EFI Slant 6
User avatar

Joined: Fri Jan 05, 2007 2:57 pm
Posts: 355
Location: Florida
Car Model:
Quote:
Is this a bat out of hell Slant drag car if not why do you want custom rods. Thanks Ron Parker :D



Hay Ron no just a weekender and local MOPAR shows
have to keep up with dodgegirls v8 Twister mid 13 will be fine :twisted:






Bagels On Juice Im On Boost

_________________
'72 Image Duster /6 with turbo build up
'03 Ram 2500 4x4 w/HEMI 5sp 4:10 posi
My Twister Page


Top
   
 Post subject:
PostPosted: Tue Jan 30, 2007 4:28 pm 
Offline
SSRN National Champion
User avatar

Joined: Thu Oct 31, 2002 3:56 pm
Posts: 1967
Location: Dalton, GA
Car Model:
Stock rods should be fine . Unless you are shooting at 400 or better horses. Bagel runs 198 rods on his juice bomber and has went 12.01 and had no rod isues. I run 198 rods and go like 12.50 and not a issue. Just have your machineist i think the term is to recondition them or refurbish them and you should be fine. Remember good parts in a engine will last longer and be more cost effect than cheap parts to do the same thing.Thanks Ron Parker






Bagels On The Juice Im On Boost










Bagels On The Juice Im On Boost


Top
   
 Post subject:
PostPosted: Sat Feb 03, 2007 3:20 am 
Offline
EFI Slant 6
User avatar

Joined: Fri Jan 05, 2007 2:57 pm
Posts: 355
Location: Florida
Car Model:
Quote:
Stock rods should be fine . Unless you are shooting at 400 or better horses. Bagel runs 198 rods on his juice bomber and has went 12.01 and had no rod isues. I run 198 rods and go like 12.50 and not a issue. Just have your machineist i think the term is to recondition them or refurbish them and you should be fine. Remember good parts in a engine will last longer and be more cost effect than cheap parts to do the same thing.Thanks Ron Parker


thanks Ron found 2 198 rods still need 4 more to get block together 225 RODS TO SHORT FOR THE PISTONS I GOT fla to cal not having to much luck any Ideeeeeas!



Bagels On The Juice Im On Boost










Bagels On The Juice Im On Boost

_________________
'72 Image Duster /6 with turbo build up
'03 Ram 2500 4x4 w/HEMI 5sp 4:10 posi
My Twister Page


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited