Oil slinger

Unanswered topics | Active topics

Home » Board index » Tech Q & A » Old Message Board

All times are UTC-07:00

Forum locked This topic is locked, you cannot edit posts or make further replies.

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

V.Tedeschi

Post subject: Oil slinger

PostPosted: Wed Apr 10, 2002 4:54 pm

It has been one year since I broke down my 225, and I am uncertain about the position of the flat metal disk that slips on the front end of the crankshaft (known as an "oil slinger"). Is is necessary, and does it sit loosely between the crank sprocket and the timing chain cover seal? If it does, it is to be positioned concave away from the sprocket?

vmted@mac.com

Top

Reply with quote

mark dingbaum

Post subject: Re: Oil slinger

PostPosted: Thu Apr 11, 2002 9:33 am

Quote:

: It has been one year since I broke down my 225,
: and I am uncertain about the position of the
: flat metal disk that slips on the front end
: of the crankshaft (known as an "oil
: slinger"). Is is necessary, and does it
: sit loosely between the crank sprocket and
: the timing chain cover seal? If it does, it
: is to be positioned concave away from the
: sprocket?

Put it back in, but make sure the concave side is toward the balancer, if it is to the back the chain will eat it up (don't ask how I know this).

regards,
mark

mldingba@rockwellcollins.com