Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 30, 2024 7:52 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
 Post subject: noise from the motor
PostPosted: Sun Jul 15, 2007 10:45 pm 
Offline
3 Deuce Weber

Joined: Thu Apr 05, 2007 12:15 pm
Posts: 97
Location: small town alberta, canada
Car Model:
started my 1984 dodge van (225 /6) after a week of sitting and it revved up and stalled. started it again and it ran a little rough before smoothing out. I knocked down the idle and started off to work. That's when i noticed a noise coming from under the hood. Opened the hood and didn't seem to be anything obviously wrong. Sounds like the fan hitting the shroud but seems to be more towards the engine than the radiator (could be nothing more than the echo of the engine compartment). Took it home and switched the vehicles. Oil is up and antifreeze in the reserve. Rad hoses were heated and solid once warmed up. Any ideas?

_________________
If at first you don't succeed, don't try skydiving.

Image
1984 dodge /6 with Lady, Evony and Breeze


Top
   
 Post subject:
PostPosted: Mon Jul 16, 2007 12:25 am 
Offline
TBI Slant 6
User avatar

Joined: Thu Feb 26, 2004 1:54 am
Posts: 181
Location: Sweden Motala
Car Model:
A crack in the fan?

_________________
Lasse
Image
Signet -66 225
Holley 600 Offy-5270 Dutra Dual,regrind. cam 272 0,420 110, head shaved 0.100 slight.ported
MSD6A
A904
7 1/4 3.23


Top
   
 Post subject:
PostPosted: Mon Jul 16, 2007 4:50 am 
Offline
EFI Slant 6
User avatar

Joined: Sun Feb 08, 2004 4:30 pm
Posts: 370
Location: West Mifflin PA
Car Model: 1967 Dodge Dart 270
Transmission dust shield??

_________________
Image
Image


Top
   
 Post subject:
PostPosted: Mon Jul 16, 2007 9:12 am 
Offline
Guru
User avatar

Joined: Mon Oct 14, 2002 4:32 pm
Posts: 4880
Location: Working in Silicon Valley, USA
Car Model:
A 'sticky' hyd. lifter ticking away?
DD


Top
   
 Post subject:
PostPosted: Mon Jul 16, 2007 10:31 pm 
Offline
3 Deuce Weber

Joined: Thu Apr 05, 2007 12:15 pm
Posts: 97
Location: small town alberta, canada
Car Model:
Quote:
A 'sticky' hyd. lifter ticking away?
Thanks for the responses. All excellent offerings, although this one seems to be the likely one. The noise seems to be coming from the center/rear of the engine. Any idea of how to fix it without taking the motor apart/out of the van?
Quote:
A crack in the fan?
Did test for movement of the fan blades. not moving (although did notice some movement of the water pump. Just a bit though. will have to keep track of that).
It's going to a mechanic (only one honest in the area now since my regular one left town) who is going to listen to it. Not sure if he can physically repair it (confined to a wheel chair after a traffic accident a couple years ago) but still a competent mechanic with alot of knowledge.

_________________
If at first you don't succeed, don't try skydiving.

Image
1984 dodge /6 with Lady, Evony and Breeze


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Ahrefs [Bot] and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited