Awhile back someone mentioned that they made solid mounts for the older A bodies outta some square tube sliced in half? If anyone has any insight into this id sure like to hear or better yet see a few pictures so I can make up a set, thanks.
-Jesse

Anyone?

http://www.slantsix.org/forum/viewtopic ... unt#123289

Search is your friend.

_________________
David Kight
'62 Valiant Signet, White
'98 Dodge Dakota
'06 Jeep Liberty

Growing older is unavoidable but growing up is strictly optional.

Not the post I was thinkin but very helpful tho. I was thinkin the mounts were shorter than 2" and they needed to be sectioned down abit. Cool of to the shop now!
-Jesse

If you take an old mount out and disassemble it, the idea becomes easy as pie.

_________________
Official Cookie and Mater Tormentor.

I did it. just the drivers side. I decided the vibration wasn't worth it. It resonated through the whole car at certain rpms in 5th gear that happened to be ideal cruising rpm's. so I will be changing it out tonight if my rubber ones show up like they R supposed 2.
J

_________________
64' Valiant Signet 5.9, 64' Dart 170 moredoor 3.7, 67' A100 3.7, 00' Dakota SLT 4.7

Didnt have an old one to copy. So I went to Kragen bought both the mounts got all my dimentions then returned them(Im such a prick). Thanks for the tips.
-Jesse

_________________
Official Cookie and Mater Tormentor.