Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 29, 2024 6:47 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Anyone....
PostPosted: Thu Oct 04, 2007 4:37 pm 
Offline
3 Deuce Weber

Joined: Sun Jun 03, 2007 2:14 pm
Posts: 66
Car Model:
Know how the dash cap comes off in my '71 Valiant? No screws, looks like it's just held in by clips?


Top
   
 Post subject:
PostPosted: Thu Oct 04, 2007 4:39 pm 
Offline
Turbo EFI
User avatar

Joined: Mon Jul 14, 2003 10:02 am
Posts: 1817
Location: Southeastern Pennsylvania
Car Model:
There are 5 speed nuts along the underside and a bolt on each end

_________________
ImageImage


Top
   
 Post subject:
PostPosted: Fri Oct 05, 2007 4:00 am 
Offline
3 Deuce Weber

Joined: Sun Jun 03, 2007 2:14 pm
Posts: 66
Car Model:
So.... how do I get to these speed nuts and bolts??? I am completely boggled on this one.


Top
   
 Post subject:
PostPosted: Fri Oct 05, 2007 4:34 am 
Offline
Turbo Slant 6
User avatar

Joined: Sun Nov 05, 2006 12:27 am
Posts: 536
Location: Rawson,Australia
Car Model:
hello,
a tube socket is a good start. the speed nuts go onto those tapered spike pin things that are usually attached to the pad ,and a normal socket wo'nt go on far enough to get the nut.
they will probably be 3/8 inch size.
if you imagine the back of the pad where it attaches to the dash assembly - you will find the row of pins/speed nuts/and each end bolts there.
being VERY flexible in getting under the dash is a BIG advantage. another good tip/idea is to take out the glove compartment and the instrument cluster. this makes access so much easier. :roll:
unfortunately,all the heater tubes and under dash fittings usually have to come out as well to get access.
do'nt plan on it being only a 30 minute job. :twisted:

hope this helps.

regards,Rod :D :D :D


Top
   
 Post subject:
PostPosted: Fri Oct 05, 2007 4:39 am 
Offline
EFI Slant 6
User avatar

Joined: Sun Feb 08, 2004 4:30 pm
Posts: 370
Location: West Mifflin PA
Car Model: 1967 Dodge Dart 270
There are (5) 3/8 nuts along the bottom of the dash pad and (2) 5/16 screws on each end of the pad. They are bolted to the dash. Pull out your glove box and stick your hands up under the dash towards the side facing closest to the driver and passenger. You should be able to feel them. They are a little tricky to get to and you may have to drop your steering collum and pull the gage cluster to get the ones on the drivers side, depending on how small your arms are and how well you can squeeze under the dash on the floor to reach them. If you have A/C its even harder. Not the easiest job but well worth it. Hope this helps.

_________________
Image
Image


Top
   
 Post subject:
PostPosted: Fri Oct 05, 2007 4:41 am 
Offline
EFI Slant 6
User avatar

Joined: Sun Feb 08, 2004 4:30 pm
Posts: 370
Location: West Mifflin PA
Car Model: 1967 Dodge Dart 270
Good advise Rod, you beat me to it. :D

_________________
Image
Image


Top
   
 Post subject:
PostPosted: Fri Oct 05, 2007 3:46 pm 
Offline
3 Deuce Weber

Joined: Sun Jun 03, 2007 2:14 pm
Posts: 66
Car Model:
Good God man! I really need to be born a son so I can use his flexibility and small size to work on my car.


Top
   
 Post subject: 5 bux
PostPosted: Fri Oct 05, 2007 7:21 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Quote:
Good God man! I really need to be born a son so I can use his flexibility and small size to work on my car.
It's funny most 12-14 year olds will mow your grass for 5-10 bux, it takes 30 minutes of fun in the sun... You give them 5 bux to play twister under the dash for 5 minutes and for some reason they're all over that...

-D.Idiot


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited