Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 29, 2024 6:14 pm

Unanswered topics | Active topics


» » Tech Q & A » Engine

All times are UTC-08:00



Post new topic  Reply to topic  Page 4 of 4
  [ 52 posts ]  Go to page Previous 1 2 3 4
  Print view Previous topic | Next topic 
Author Message
Dart74
 Post subject:
PostPosted: Sat Dec 08, 2007 3:42 am 
Offline
4 BBL ''Hyper-Pak''

Joined: Fri Nov 30, 2007 2:02 pm
Posts: 39
Car Model:
Quote:
Why can't a daily driver be 240hp? I'm confused, so is the goal 240hp after nitrous? Anyways I learned after I switched over to EFI I could put A LOT more cam into my engine and still have a soft idle.
The engine is pretty darn mild. I didn't touch the shortblock except for the cam. The head was shaved .1, 3 angle, polishing the bowls, and bigger valves. So after all that it seems like I can be hugging up to 200hp and gobs of torque.
The EFI guestimate was simply knowing how much fuel is being sucked through the TBI, and refering it to the 350 I stole it off and knowing how much horsepower those kicked out. Also going off what other people have done and their known dyno numbers.
Hi! I didn´t say it can¨t be 240hp daily driver, but I´m determined to not do any work on the shortblock including cam. If the rest of the work (head, manfiold, efi) turns up to be a 200hp that´s cool but I doubt it. I´ll post new dyno-numbers when I´ve got the new head on and the EFI installed, and we´ll take it from there :)

Have a nice weekend

_________________
Rob,
Dart -74 4dht.
Top
   
Reply with quote  
Dart270
 Post subject:
PostPosted: Sat Dec 08, 2007 9:05 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16793
Location: Blacksburg, VA
Car Model:
If you don't want to touch the shortblock, including cam, then N2O or boost are the ways to get 200rwhp. No arguments here.

Lou

_________________
Home of Slant6-powered fun machines since 1988
Top
   
Reply with quote  
runvs_826
 Post subject:
PostPosted: Sun Dec 09, 2007 10:48 am 
Offline
Turbo Slant 6
User avatar

Joined: Mon Jul 17, 2006 12:30 pm
Posts: 699
Location: Nweberg, OR
Car Model:
I comprehend now, tell me how tuning with the nitrous goes I'll be very interested on the dual timing table stuff!
Top
   
Reply with quote  
Dart74
 Post subject:
PostPosted: Sun Dec 09, 2007 2:47 pm 
Offline
4 BBL ''Hyper-Pak''

Joined: Fri Nov 30, 2007 2:02 pm
Posts: 39
Car Model:
Hi :) I´ve been busy this weekend working on my second daily driver (yeah, the one NOT to be modified hehe) but I have scheduled a new paintjob for the Dart and I´m hoping my new head comes back early this week. My new ECU got stuck in the customs but I recon it´ll be here soon.


Over and out!

_________________
Rob,
Dart -74 4dht.
Top
   
Reply with quote  
SlantSixDan
 Post subject:
PostPosted: Wed Dec 12, 2007 9:37 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
In reality, stock 413s produce a great deal more than 90 RWHP.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image
Top
   
Reply with quote  
Dart74
 Post subject:
PostPosted: Thu Dec 13, 2007 8:03 am 
Offline
4 BBL ''Hyper-Pak''

Joined: Fri Nov 30, 2007 2:02 pm
Posts: 39
Car Model:
Today my new MS ECU arrived and yesterday I cleaned out the enginebay. Next on the list is to give the enginebay a paint-up before I start working on a new wiring-harness. I´ll update with pics this weekend.

_________________
Rob,
Dart -74 4dht.
Top
   
Reply with quote  
Dart74
 Post subject:
PostPosted: Sat Feb 02, 2008 11:02 am 
Offline
4 BBL ''Hyper-Pak''

Joined: Fri Nov 30, 2007 2:02 pm
Posts: 39
Car Model:
Hi all!

I haven´t update this thread for a while, but don´t worry I´m still on it ;) Of course this project went mad (as they usually do) so at the moment I am waiting for Cam, Headers and new clifford head (Thanks Sean). I have stripped down the car, done some welding on the floor, painted it and installed a new carpet with 2 glasfibre bucket seats (3kg/each), welded in a strut tower brace in the back and installed new 4pt seatbelts.

Enginebay is clean, and the car is ready for a new paintjob. Looks like this is what I´ll be running:

225" stock block (estimade time of survival? :twisted: )
Clifford Head
Clifford Cam (Mild)
Clifford split headers

MSD 6AL (Installed)
Electronic dist (Installed)
Alum. intake manifold, ported & rebuilt for 318" throttlebody (Installed)
Megasquirt ECU (Installed)

(Count in some sort of poweradder............)

Also got myself a set of new 185/90 R15 Slicks from kumho..

Now looking for suitable tranny rearaxel.. along with springs.

_________________
Rob,
Dart -74 4dht.
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 4 of 4
  [ 52 posts ]  Go to page Previous 1 2 3 4

» » Tech Q & A » Engine

All times are UTC-08:00

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], Google [Bot], Semrush [Bot] and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited