http://tinyurl.com/2l5l6s

Anyone know exactly what these are? Type/Brand?

_________________
67Cuda,FAST EZEFI,340cu,CR=10.25,RollerCam&Rocker (XR268HR,#20-810-9)(#1622-16)(EddyRPM#60779,#7576), (MSD6AL,#6425) A904, GearVendorsOD, 8 1/4,3.55:1, ClassicAir

They are Cliffords. Can't tell what years from the angle of the pictures, but I think they are for the 67 up "A" body. If you can get them cheap enough, take a chance.

On second look, they might be truck.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

yes there clifford , i have a set brought them new 79 or 80, they were 1 1/2 in tubes, the hookers were the same confirguation but 1 5/8in and the flanges were thinner(3/8ins). they are car header going by the shape, only thing i found was the collector bolt flange would rub the trans pan, a slip on collector would fix that. also the shape of #5 pipe didn`t allow the big starter to be removed without removing the header, the hooker had no problems with the starter.

Thanks for using the short link!

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.