Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 20, 2026 9:25 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Weird 170
PostPosted: Tue Apr 22, 2008 7:59 pm 
Offline
TBI Slant 6

Joined: Fri May 30, 2003 4:32 pm
Posts: 131
Location: Northwest FL
Car Model:
I decided to take apart the 170 that's been sitting on my garage floor for the past two years. Came out of my "61 Valiant. First strange thing I noticed was the pistons .100 below the deck. Then I get the crank out and this thing is heavy! OK I've got one of those large counterweight cranks. What were the engineers thinking when they designed this crank? Why would you need a crankshaft this massive for a 170 cu. in. engine with a 3.125" stroke. Is there some advantage to this? I mean this thing is almost as heavy as the block.
I checked the deck height....I've got one of those mythical 170 raised blocks.
Compression ratio checks in at a healthy 6.9 to 1.
Is this a forklift engine or something?

_________________
Franklin
'61 Valiant


Top
   
 Post subject:
PostPosted: Wed Apr 23, 2008 5:09 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 9094
Location: Silver Springs, Fl.
Car Model:
Are you positive it is a 170? I don't know about any factory pistons like that, but the aftermarket ( I think Badger) did list a "low compression" piston for the slant six, which had a higher pin location. I don't remember the difference in the location, and that catalog is buried. It is possible this engine was rebuilt during it's 40+ year lifetime.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject:
PostPosted: Wed Apr 23, 2008 10:31 am 
Offline
TBI Slant 6

Joined: Fri May 30, 2003 4:32 pm
Posts: 131
Location: Northwest FL
Car Model:
Charrlie, Its been rebuilt. It has .040" over pistons in it. I checked 'em and they're right at 1.75" comp. ht.
The block is about 1/8" taller than my other 170.
I'm going to mill .100" off the deck to get the compression up.

_________________
Franklin
'61 Valiant


Top
   
 Post subject:
PostPosted: Wed Apr 23, 2008 6:40 pm 
Offline
Turbo Slant 6
User avatar

Joined: Mon Nov 17, 2003 8:51 pm
Posts: 701
Location: Marion.Va
Car Model:
HecksHemi,
I had the same problem when I pulled the head on my freshly rebuilt 170 only the pistons were .030 over and .075 in the hole.As my engine had been freshly rebuilt I chose to mill a .125 off of the head to get 9.3 -1 compression ratio.The engine seems to run well with this c.r. and a Comp 264 cam.
HyperValiant

_________________
1960 Hyper-Pac Valiant(rolling test-bed)
1963 Valiant V2OO(Son's summer project,- he just turned 15 :-) )
1972 Valiant 4dr(Daughter Kelly's repair in progress)
1974 Valiant (v8) daughter Kelly's work in progress


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited