Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 30, 2024 11:34 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Thu May 15, 2008 9:21 am 
Offline
TBI Slant 6
User avatar

Joined: Mon Feb 14, 2005 9:51 am
Posts: 101
Location: Southern Finland
Car Model:
Got my newest Mopar Muscle magazine (volume 21, #7, July 2008, although it's May in my calender...weird) yesterday and skimmed through it today.
On page 112 in the Bench Racing section Cody Christiansen asks if it would be time to build slant sixes in their Engine Challenge.
The answer is that there "is such a limited following for those engines that I can almost guarantee we wouldn't get enough shops to participate. Their cool, but 98-percent of our readership wants V-8 stuff."
Should we each and everyone send Mopar Muscle an e-mail so they would be aware of all of us that are into slant sixes, or do you think it's vain?
But what is the right e-mail adress? Is it:mopar.muscle@sourceinterlink.com?
That address is used in the Performance Clinic and Rare Finds sections, but I didn't find any mentioned in the Bench Racing section.

_________________
Mopar or no car.

Bye the way, who the F**K is Tu Ning?


Top
   
 Post subject:
PostPosted: Thu May 15, 2008 10:08 am 
Offline
Turbo EFI
User avatar

Joined: Fri Jul 16, 2004 5:22 am
Posts: 1134
Location: Carrollton, TX
Car Model:
It stuns me that, according to Mopar Muscle, the readership wants to read about the same engines and the same cars, over and over again. Not that it can't be true, but I'm amazed that more people aren't interested in variety.

But then my boredom with E-bodies is well-documented, along with Camaros, Mustangs, and any and all cars that "everyone likes".

If someone can track down an address, I'll drop 'em another line (AGAIN), although I'm not optimistic that it will do much good. Now if EVERYONE registered at slantsix.org would contact them, then maybe...

_________________
vm

Image


Top
   
 Post subject:
PostPosted: Thu May 15, 2008 10:32 am 
Offline
Board Sponsor
User avatar

Joined: Mon Oct 28, 2002 2:42 pm
Posts: 694
Location: Santa Cruz, CA
Car Model:
Mopar Action is far and away a superior publication, IMHO.

_________________
obliquely-inclined state of mind


Top
   
 Post subject:
PostPosted: Thu May 15, 2008 10:40 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24447
Location: North America
Car Model:
Before we all start writing indignant letters and e-mails...

...remember to be careful what we wish for; we just might get it.

Publicity is fun for a few moments. Its long-term effects tend to make one wish he had kept his damn mouth shut.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Thu May 15, 2008 11:11 am 
Offline
Guru
User avatar

Joined: Mon Oct 14, 2002 4:32 pm
Posts: 4880
Location: Working in Silicon Valley, USA
Car Model:
As fuel prices continue to increase, I get more calls and emails from all those V8 owners asking questions about building Slants.

My guess is that we will continue to see some increased interest from some of the "daily driver" Mopar owners who want to drive their cars, but that 8 mpg big block has them reviewing their options. One of those options is to install a SL6 so they can still drive that "cool old car" with-out going broke paying for the gas.

If the Mopar mags do any new SL6 stories, I bet it will be along the "fuel savings" line of thought.
DD


Top
   
 Post subject:
PostPosted: Thu May 15, 2008 11:43 am 
Offline
EFI Slant 6

Joined: Wed Nov 07, 2007 9:34 am
Posts: 340
Location: Upstate NY
Car Model:
If everyone wanted one the prices for old slant stuff would rise, super six setups from junk yards would no longer be a cheap swap, maybe some cool new parts would come from it but I doubt it.

_________________
Image
Grandpa's 1974 Dart Custom 4 door 225 auto, Aluminum Radiator, 1920 Holley.


Top
   
 Post subject:
PostPosted: Thu May 15, 2008 12:42 pm 
Offline
Supercharged
User avatar

Joined: Thu Jan 27, 2005 8:32 pm
Posts: 7834
Location: Portland-ish
Car Model: Fiat 500e
I really doubt any new parts would come from renewed interest in the slant. I agree that used performance parts would go up in price. I would predict Offy and Clifford selling some more manifolds and more new performance cams and such being bought new, but that's about it. We might get some more traffic and new members here too.

_________________
Joshua


Top
   
 Post subject:
PostPosted: Thu May 15, 2008 12:44 pm 
Offline
Board Sponsor
User avatar

Joined: Fri Nov 01, 2002 5:02 pm
Posts: 1824
Location: Waterloo, Iowa
Car Model: '23 T-bucket
The reality of it is.....MM is right, most guys with a 60's or early 70's Mopar want and go with a V-8, and the slant enthusiast crowd is rather small. (It's better that way, to some extent.)
If I had to make a suggestion, the next engine challenge would probably be a V-6 of some common size.

I suggest you save the postage stamp for something more practical.

Roger


Top
   
 Post subject:
PostPosted: Thu May 15, 2008 1:00 pm 
Offline
Board Sponsor
User avatar

Joined: Mon Oct 28, 2002 2:42 pm
Posts: 694
Location: Santa Cruz, CA
Car Model:
I think the escalating price of crushed scrap is a far bigger problem than the few, new slant enthusiasts a magazine article might inspire. At least as far as the availability for cheap boneyard parts goes.

_________________
obliquely-inclined state of mind


Top
   
 Post subject:
PostPosted: Thu May 15, 2008 5:17 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14494
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
Quote:
Before we all start writing indignant letters and e-mails...

...remember to be careful what we wish for; we just might get it.

Publicity is fun for a few moments. Its long-term effects tend to make one wish he had kept his damn mouth shut.
Right on Dan. :D

My issue with the Mopar rags is that even if they build a Slant it is usually some cobbled together POS that you can't duplicate for less than $10K because they use mega dollar parts to appease advertisers. :roll:

Watch any thread on Moparts/Moparchat about installing a Slant for gas mileage. You'll see 100 people telling you to put in a 318, and maybe 4 of us defending the Slant. :evil:

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject:
PostPosted: Thu May 15, 2008 9:13 pm 
Offline
Turbo EFI
User avatar

Joined: Thu Nov 11, 2004 4:33 pm
Posts: 1004
Location: Sacramento, CA
Car Model:
I agree with Dan, we should probably keep our mouths shut on this one. A lot of us like slants and the cars they are in because they're different from the norm. If they become the norm then what do we move on to? 273's?


Top
   
 Post subject:
PostPosted: Fri May 16, 2008 2:48 am 
Offline
TBI Slant 6
User avatar

Joined: Sun Aug 29, 2004 7:00 am
Posts: 235
Location: Old Junee, Australia
Car Model: 69 Valiant 225, 70 with a 265, 70 with a 318
I disagree.
If there is a bit of interest in the 6 due to the rising fuel prices (and seriously, it's not going to get cheaper), we may see some new products.
It would be great to walk in and buy something straight of the shelf to suit.

_________________
Richard (aka Fingers)
Image


Top
   
 Post subject: Yep..
PostPosted: Fri May 16, 2008 5:52 am 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Quote:
If there is a bit of interest in the 6 due to the rising fuel prices (and seriously, it's not going to get cheaper), we may see some new products.
No, I agree with Dan, at the moment the cars are getting harder to find... with renewed interest in 'economy' the only new products would be tailored for 'economy' not 'performance'... and the price would be $$$ after that... technically, with this thought in mind, the first thing that would get batted around the park would be the old 'Feather Duster' topic... also with anything good comes some bad items, along with economy parts comes 'pollution controls' to keep up with today's way of thinking 'green'...


-D.Idiot


Top
   
 Post subject:
PostPosted: Fri May 16, 2008 7:52 pm 
Offline
TBI Slant 6

Joined: Thu Dec 28, 2006 8:27 am
Posts: 110
Car Model:
I agree with Dan third. There's already enough people at this party and we're running low on beer :D


Top
   
 Post subject:
PostPosted: Fri May 16, 2008 7:57 pm 
Offline
TBI Slant 6
User avatar

Joined: Sun Aug 29, 2004 7:00 am
Posts: 235
Location: Old Junee, Australia
Car Model: 69 Valiant 225, 70 with a 265, 70 with a 318
Quote:
I agree with Dan third. There's already enough people at this party and we're running low on beer :D

Thats a great way to put it :lol:

_________________
Richard (aka Fingers)
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited