Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 29, 2024 12:47 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Newbie Question
PostPosted: Sun Jun 01, 2008 6:04 am 
Offline
1 BBL (New)

Joined: Thu May 22, 2008 6:55 pm
Posts: 8
Car Model:
I just acquired a slant 6 from a 1985 dodge pick up going to put it in my jeep and replace the 318 that just blew up, I want to use my existing wiring and ecu box and single ballast resistor now can I use the current distributor on the /6 or do I need to change to an older electronic distributor, also plan on upgrading to a better carb instead of the one barrel on the engine. so what are my distributor options that you would recommend?


Top
   
 Post subject:
PostPosted: Sun Jun 01, 2008 6:46 am 
Offline
Board Sponsor
User avatar

Joined: Tue Jun 27, 2006 8:21 am
Posts: 1614
Location: Orlando, FL
Car Model:
Planning to change trans/bellhousing also?

_________________
67Cuda,FAST EZEFI,340cu,CR=10.25,RollerCam&Rocker (XR268HR,#20-810-9)(#1622-16)(EddyRPM#60779,#7576), (MSD6AL,#6425) A904, GearVendorsOD, 8 1/4,3.55:1, ClassicAir
Image


Top
   
 Post subject:
PostPosted: Sun Jun 01, 2008 7:05 am 
Offline
1 BBL (New)

Joined: Thu May 22, 2008 6:55 pm
Posts: 8
Car Model:
Yes just picked up a /6 727 for it.


Top
   
 Post subject:
PostPosted: Sun Jun 01, 2008 7:19 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 8706
Location: Silver Springs, Fl.
Car Model:
What year/model jeep? Are you wanting to use the jeep ign module or the jeep ECU (computer)? If a newer jeep with ECU , I don't think that will work. If ign module, maybe.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject:
PostPosted: Sun Jun 01, 2008 10:22 am 
Offline
1 BBL (New)

Joined: Thu May 22, 2008 6:55 pm
Posts: 8
Car Model:
Its a cj7 with a 318 in it with electronic distributor and a orange ecu box want to keep wiring the same and drop in slant6


Top
   
 Post subject:
PostPosted: Sun Jun 01, 2008 9:46 pm 
Offline
TBI Slant 6
User avatar

Joined: Fri Dec 01, 2006 8:34 pm
Posts: 242
Location: Chicago
Car Model:
If the Slant distributor has counter-weights and springs inside of it you should be able to plug and play. If there are no weights and springs inside, it's a Lean Burn distributor and you'll need an older style electronic dizzy.

_________________
There are 3 things that will live forever, cockroaches, Keith Richards, and Slant Six Dusters !!!

http://s4.photobucket.com/albums/y128/slantasaurus/

take a look around


Top
   
 Post subject:
PostPosted: Mon Jun 02, 2008 4:44 am 
Offline
1 BBL (New)

Joined: Thu May 22, 2008 6:55 pm
Posts: 8
Car Model:
the distributor has two plugs both two wires per plug if that helps i believe the motor is an 85


Top
   
 Post subject:
PostPosted: Mon Jun 02, 2008 6:58 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
The two-plug distributor is what's normally found in an '85 engine, but it won't work for what you want to do. If you want a brand-new one that'll drop into the '85 engine and plug right into your Jeep's existing wiring (though you may have to extend some of the wires to reach the slant-6's different distributor location compared to the V8), you could go snag this one. I've bought a few of these off this seller. Despite his far-flung location, his shipping service is fast and reliable, I've found.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Wed Jun 04, 2008 4:27 pm 
Offline
1 BBL (New)

Joined: Thu May 22, 2008 6:55 pm
Posts: 8
Car Model:
will this work http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0226012827


Top
   
 Post subject:
PostPosted: Wed Jun 04, 2008 5:11 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24446
Location: North America
Car Model:
Probably, but a new one's better than a "remanufactured" one, any and every day.

(Could I get you to please read & use the eBay link posting guidelines contained in this post? It makes things a lot easier for everyone who wants to read your post/thread. We don't post eBay's ultra-long web links here; it screws up the board formatting for the whole, entire thread. I've gone ahead and edited your link.)

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Thu Jun 05, 2008 5:03 pm 
Offline
1 BBL (New)

Joined: Thu May 22, 2008 6:55 pm
Posts: 8
Car Model:
sorry about the link from ebay didn't know


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited