The Mobile engine Testing Station.

http://www.harborfreight.com/cpi/ctaf/d ... mber=98334

I would like to have something like this to test and tune my back-up engine. Others out there have probably built something already. If you have I would appreciate it if you could post some pictures.

bwhitejr

_________________
'72 Duster (Performance 360)
'83 Ramcharger (Performance 318)
'80 TrailDuster (360)
'80 D-150 Truck (See Below)
CompCams 252S, Holley 390cfm, Offy manifold
Ported, Polished and Gasket Matched
P4286813 Springs,0.040 Overbore,
0.090 Shaved Head

cool ive been looking for one of these cheap

_________________
1976 dart sport
www.heartlandmopars.com

Cool!

I have been thinking aboot building one in my spare time.

_________________
Official Cookie and Mater Tormentor.

this is one i made from scrap i had, its not pretty but it works , running engine to check it before i put it in the race car. http://www.youtube.com/watch?v=8d-qqeK0B-I

just a word of caution, be careful with these test stands. it looks for like it was ment for a V engine rather than a leaning tower. my real concern would be the first hard pull on the engine would torque the stand up( raise it off the ground on one side, since our engines are already leaning over )

BTW terry wicked sweet engine !!


-Mike

_________________
I am the Guardian, I hate helos, everything leaks.......

I've seen that vid before Terry, nice!!!!

_________________
-1972 Valiant-

'72 Valiant