Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 30, 2024 11:05 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
 Post subject: '72 Bucket Seats
PostPosted: Thu Dec 04, 2008 8:59 am 
Offline
4 BBL ''Hyper-Pak''

Joined: Sat Nov 01, 2008 5:35 am
Posts: 30
Location: West Michigan
Car Model:
I have a '72 Swinger with the bench seat. I have found a pair of '72 Duster bucket seats with tracks on Craig's List and wonder if they would fit with little to no modification? I was told that there should be "indents" in the floor pan that I should be able to drill out for the bucket seats installation. The current bench seat does need upholstering and I figured why not replace with buckets. Any help and advice would be most appreciated. The buckets have been for sale for quite awhile for $400.

_________________
Bill
1972 Dart Swinger


Top
   
 Post subject:
PostPosted: Thu Dec 04, 2008 10:25 am 
Offline
TBI Slant 6
User avatar

Joined: Fri Dec 01, 2006 8:34 pm
Posts: 242
Location: Chicago
Car Model:
My Duster has buckets, but all the holes for both bench and buckets were stamped open by the factory and plastic plugs filled the unused holes, so you probably won't have to do anything except pop the plugs out and put them in the bench seat holes.

_________________
There are 3 things that will live forever, cockroaches, Keith Richards, and Slant Six Dusters !!!

http://s4.photobucket.com/albums/y128/slantasaurus/

take a look around


Top
   
 Post subject:
PostPosted: Thu Dec 04, 2008 10:53 am 
Offline
Turbo EFI
User avatar

Joined: Fri Jul 16, 2004 5:22 am
Posts: 1134
Location: Carrollton, TX
Car Model:
They will bolt in with little work, HOWEVER, the factory also reinforced the extra bucket seat mounting points, so for safety's sake, you should, too.

These are available for that purpose:

http://tinyurl.com/56mgv7

_________________
vm

Image


Top
   
 Post subject:
PostPosted: Thu Dec 04, 2008 3:20 pm 
Offline
4 BBL ''Hyper-Pak''

Joined: Sat Nov 01, 2008 5:35 am
Posts: 30
Location: West Michigan
Car Model:
Thanks guys for the quick replies and advice! I will purchase the extra mounting supports when I get buckets. Bill

_________________
Bill
1972 Dart Swinger


Top
   
 Post subject:
PostPosted: Mon Dec 08, 2008 10:48 am 
Offline
3 Deuce Weber
User avatar

Joined: Tue Oct 14, 2008 8:39 pm
Posts: 56
Location: littlestown pa
Car Model:
u mite haft to drill some holes in the floor bords because the hole indents arnt cut out i dont think id wory about the putting suports in the the floor bords unless its rusted some holes there :arrow: 8)

_________________
Image


Top
   
 Post subject:
PostPosted: Mon Dec 08, 2008 11:00 am 
Offline
Supercharged
User avatar

Joined: Thu Jan 27, 2005 8:32 pm
Posts: 7834
Location: Portland-ish
Car Model: Fiat 500e
Quote:
They will bolt in with little work, HOWEVER, the factory also reinforced the extra bucket seat mounting points, so for safety's sake, you should, too.

These are available for that purpose:

http://tinyurl.com/56mgv7
Hey, I know those Rocket Restorations folks! Nice people! I might have to grab a pair of these in case I want to ditch the bench in my Valiant.

_________________
Joshua


Top
   
 Post subject:
PostPosted: Mon Dec 08, 2008 7:56 pm 
Offline
Turbo EFI
User avatar

Joined: Fri Jul 16, 2004 5:22 am
Posts: 1134
Location: Carrollton, TX
Car Model:
Quote:
u mite haft to drill some holes in the floor bords because the hole indents arnt cut out i dont think id wory about the putting suports in the the floor bords unless its rusted some holes there :arrow: 8)
That would be extremely dangerous if the car was ever involved in an accident. The supports aren't there to just hold the seat. They're there to secure it during an impact. Please don't risk your life by taking the chance - there are few enough of us slanters as it is...

_________________
vm

Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited