Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Mon Dec 02, 2024 7:55 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Holley 4160 Now Rebuilt
PostPosted: Wed Dec 10, 2008 6:05 pm 
Offline
Supercharged
User avatar

Joined: Sat Feb 16, 2008 1:25 pm
Posts: 5611
Location: Downeast Maine
Car Model:
I got the old 390 cfm Holley rebuilt on Monday. The hardest part was removing the old bits of paper gasket. I did not disturb the butterflies as they were nice and snug, and no grooving in the throttle body.

Tuesday was just too cold & snowy to be bolting down aluminum bits with a high of 14 deg F, however today it was rain, 50 degs., and the snow was gone, so I installed the carb. For those of you that don't live in a cold climate, when iron is real cold and than the air suddenly warms 50 degs. in a few hours and is humid, everything sweats.

After checking for loose fittings, I turned the green knob on the battery to let loose 12 volts, and jumped in and cranked her over for a bit. First there was vapor wafting up by the fire wall, at which point I stopped the crankage (new word) to investigate... No big deal, the starter just warmed up and was evaporating some condensation. About five seconds into the second cranking session she fired up to a nice smooth high idle.

After a little messing around with the vacuum gage & screw driver, I took it for a spin on our neighbor hood sand covered streets in the rain, and spin it did LOL. For the first time since I have owned this car, I was able to get WOT, and open secondary's. Granted I was in first gear the whole time, but this car has a new perky personality.

One reason for non performing vacuum operated secondary's:

Image

Watch the transmission page for the next project in this never ending saga of mission creep...

_________________
67' Dart GT Convertible; the old Chrysler Corp.
82' LeBaron Convertible; the new Chrysler Corp
07' 300 C AWD; Now by Fiat, the old new Chrysler LLC

Image


Top
   
 Post subject:
PostPosted: Thu Dec 11, 2008 10:06 am 
Offline
Supercharged
User avatar

Joined: Mon Jan 15, 2007 5:05 pm
Posts: 3767
Location: Black Diamond, WA
Car Model:
Very Cool! Glad you got things working.
One problem fixed and how many more to go?
Maybe now you can see if that distributor recurve is working for you.
As light as your car is it should be a rocket with that setup.

_________________
Aggressive Ted

http://cid-32f1e50ddb40a03c.photos.live ... %20Swinger


74 Swinger, 9.5 comp 254/.435 lift cam, 904, ram air, electric fans, 2.5" HP2 & FM70 ex, 1920 Holley#56jet, 2.76 8 3/4 Sure-Grip, 26" tires, 25+MPG


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited