All,

I'm still working on my 73 dart, and the turbo will be moving forward once this floor gets finished. Taking a long time, longer than I'd hoped... Oh well, such is cars. Anyways, I'm shooting for 300rwhp when I'm done. That means I need a bit more than that out of the engine, is this possible in a slant? I'm sure anything is possible, but, is it possible in a street car, without nos, and with a turbo??

_________________
1973 Dodge Dart, 225 SL6, 1986 Camaro Iroc-Z-28, 350, 5spd, 1978 Dodge w150, 360, 1966 Dodge Dart 270, 225 SL6

300 horsepower is quite plausible on a turbo with enough boost. What sort of turbo are you running?

_________________
"Mad Scientist" Matt Cramer
'66 Dart - turbocharged 225
My blog - Mad Scientist Matt's Lair

@matt

I haven't got that far, I'm currently replacing the floor, the turbo selection is still up in the air for it...

Here's what I'm doing right now:
http://www.getdropbox.com/gallery/16049 ... k?h=c1d00f

_________________
1973 Dodge Dart, 225 SL6, 1986 Camaro Iroc-Z-28, 350, 5spd, 1978 Dodge w150, 360, 1966 Dodge Dart 270, 225 SL6

With a stock 225 plus blow thru 600DP Holley and 21 psi, I'm at 260RWHP. Stock Buick 87 GN Turbo.

Sounds like I should be able to do it, I'm going to pull my engine apart, and take a book I have about building top fuel engines, and build it to that sort of spec, meaning fully balanced, etc.

_________________
1973 Dodge Dart, 225 SL6, 1986 Camaro Iroc-Z-28, 350, 5spd, 1978 Dodge w150, 360, 1966 Dodge Dart 270, 225 SL6

300 at the wheels will be in the neighborhood of 365 at the crank. Choose your parts wisely and it should be a piece of cake.

_________________
Official Cookie and Mater Tormentor.

Well, I have plenty of time, you can tell from the pics it will be a little bit....gotta get that floor done!

_________________
1973 Dodge Dart, 225 SL6, 1986 Camaro Iroc-Z-28, 350, 5spd, 1978 Dodge w150, 360, 1966 Dodge Dart 270, 225 SL6