Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Mon Jan 13, 2025 9:25 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 296 posts ]  Go to page Previous 19 10 11 12 1320 Next
Author Message
 Post subject:
PostPosted: Tue May 26, 2009 3:50 pm 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 6291
Location: So California
Car Model: 64 Plymouth Valiant
Quote:
Went with another 1/2 # boost and 2* of timing. Total timing is 23*. One step colder plug. Plug looked just right. It spun on the line. Suspension didn't even unload. After that run it rained and the air got real heavy. The seven runs after this I struggled with A/F problems so only made three more full passes. This car seems very tempremental with weather changes today and yesterday. I need to get a weather station. Shift light came on 200 ft or so before the line so I may have to use 2.76 gears. Got the convertor to flash to about 4200-4300. Tried different technics this weekend. To many lean conditions took out the head gasket today. Maybe put on a better head this time. Later
How close are you to an airport?

If you're close, you can use a scanner for ATIS weather information or call them (there's usually a phone number for ATIS)

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

8)


Top
   
 Post subject:
PostPosted: Tue May 26, 2009 6:20 pm 
Offline
EFI Slant 6

Joined: Sat Apr 19, 2008 9:00 pm
Posts: 375
Location: NoDak
Car Model:
The airport would be 17 miles from track.

_________________
10.74 @ 127.47 mph 1320 ft
6.65 @ 107.80 mph 660 ft

http://www.youtube.com/c/turbo66valiant
Follow on Instagram - turbo66valiant
Facebook - https://www.facebook.com/ryan.peterson.737


Top
   
 Post subject:
PostPosted: Tue May 26, 2009 6:28 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14545
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
You really need a weather station with you. You don't have to have the bestest, greatest, but one that will remain constant. Also, do not be concerned if your station gives a different reading than someone else's. Weather stations are finicky and rarely ever agree with each other.

Summit used to sell a really nice little all-in-one deal that was not too expensive. IIRC, it gives temp, humidity, barometer, and maybe altitude.

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject:
PostPosted: Wed May 27, 2009 7:08 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16811
Location: Blacksburg, VA
Car Model:
Congrats, Ryan. You are in a small and proud club of 10 sec Slant cars now.

Looking forward to seeing the car run at Kearney. I just saw and paid for all my turbo parts in MN, and they'll go on my '68 Dart street car in the fall/winter. I'll bring them along to that race...

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
 Post subject:
PostPosted: Wed May 27, 2009 10:03 pm 
Offline
Turbo EFI

Joined: Tue Jan 06, 2004 11:21 pm
Posts: 1391
Location: long beach ca
Car Model:
FANTASTIC,Guzzi Mark


Top
   
 Post subject:
PostPosted: Thu May 28, 2009 11:19 pm 
Offline
TBI Slant 6

Joined: Tue Mar 31, 2009 10:09 pm
Posts: 180
Car Model:
I had to open a YouTube account just so that I could post on your running into the 10's.

Nice work, very well done.


Top
   
 Post subject:
PostPosted: Tue Sep 01, 2009 8:14 pm 
Offline
EFI Slant 6

Joined: Sat Apr 19, 2008 9:00 pm
Posts: 375
Location: NoDak
Car Model:
Going racing again this weekend. Changing my pinion angle from -2 to -6 or so. Hope it helps the bottom end. Gotta get it down the track one more time this year.

_________________
10.74 @ 127.47 mph 1320 ft
6.65 @ 107.80 mph 660 ft

http://www.youtube.com/c/turbo66valiant
Follow on Instagram - turbo66valiant
Facebook - https://www.facebook.com/ryan.peterson.737


Top
   
 Post subject:
PostPosted: Wed Sep 02, 2009 7:08 am 
Offline
Turbo Slant 6
User avatar

Joined: Sun Apr 09, 2006 6:08 pm
Posts: 962
Location: Comfrey MN
Car Model:
Where are you going??

_________________
Chris'
Autobody
Restoration
Service


Top
   
 Post subject:
PostPosted: Wed Sep 02, 2009 8:16 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16811
Location: Blacksburg, VA
Car Model:
Sounds good, Ryan. That thing launches pretty hard...

I could tell you were not so jazzed about "only" running low 11s at Kearney. The air was pretty bad, though.

Have fun,

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
 Post subject:
PostPosted: Thu Sep 03, 2009 10:36 am 
Offline
EFI Slant 6

Joined: Sat Apr 19, 2008 9:00 pm
Posts: 375
Location: NoDak
Car Model:
Going to Pierre. You coming over Chris? I wasn't to happy with Kearney. Traction was poor and yes, air was bad. When the air isn't good its hard to get this car to run a good A/F mix. Hit 6000 rpm on the last run when the tires lost grip. Didn't like that at all. The muddy road entering the track was interesting also. I did like the pits though, all cement. Rear end is now 5.5* pinion angle and the intercooler tubes are fixed. Just expanded them with a exhaust pipe expander. Later

_________________
10.74 @ 127.47 mph 1320 ft
6.65 @ 107.80 mph 660 ft

http://www.youtube.com/c/turbo66valiant
Follow on Instagram - turbo66valiant
Facebook - https://www.facebook.com/ryan.peterson.737


Top
   
 Post subject:
PostPosted: Fri Sep 04, 2009 5:52 am 
Offline
Turbo Slant 6
User avatar

Joined: Sun Apr 09, 2006 6:08 pm
Posts: 962
Location: Comfrey MN
Car Model:
Quote:
Going to Pierre. You coming over Chris?
I wish I could but I have a customer coming Saturday to drop off a GTO.

Best of luck. Keep the shiney side up!!!

_________________
Chris'
Autobody
Restoration
Service


Top
   
 Post subject:
PostPosted: Fri Sep 04, 2009 6:35 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16811
Location: Blacksburg, VA
Car Model:
10.81 @ 125? Happy whooshing...

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
 Post subject:
PostPosted: Fri Sep 04, 2009 7:33 am 
Offline
EFI Slant 6

Joined: Sat Apr 19, 2008 9:00 pm
Posts: 375
Location: NoDak
Car Model:
Quote:
10.81 @ 125? Happy whooshing...

Lou
10.81 eh? How about a 10.79? Only if the air is good though. I'm always happy whooooshing. Later

_________________
10.74 @ 127.47 mph 1320 ft
6.65 @ 107.80 mph 660 ft

http://www.youtube.com/c/turbo66valiant
Follow on Instagram - turbo66valiant
Facebook - https://www.facebook.com/ryan.peterson.737


Top
   
 Post subject:
PostPosted: Sun Sep 06, 2009 8:49 pm 
Offline
EFI Slant 6

Joined: Sat Apr 19, 2008 9:00 pm
Posts: 375
Location: NoDak
Car Model:
Well, ran a 10.96 at 123. Air wasn't the best. Adjusted elevation was 4300. Still can't get a handlle on the A/F. About 13.5 is the best it will do. Blocked of the PV, bumped jet size 8 sizes and still no good. Currently 86 front, 94 rear and 14 gph meth jet. Only made one full pass. Seems as if the carb isn't boost referencing well. Later

_________________
10.74 @ 127.47 mph 1320 ft
6.65 @ 107.80 mph 660 ft

http://www.youtube.com/c/turbo66valiant
Follow on Instagram - turbo66valiant
Facebook - https://www.facebook.com/ryan.peterson.737


Top
   
 Post subject:
PostPosted: Mon Sep 07, 2009 2:38 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Sep 20, 2006 7:08 pm
Posts: 1114
Location: The Hand
Car Model:
So close again! When you talk about being boost referenced, do you have a seperate line (from the carb hat) to the powervalve that opens it when it sees boost?

Tom

_________________
11.02 @ 120.56
http://www.youtube.com/watch?v=EAxRmoDgsdY
Chassis dyno
http://www.youtube.com/watch?v=wd6hFGzLJMc


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 296 posts ]  Go to page Previous 19 10 11 12 1320 Next

All times are UTC-08:00


Who is online

Users browsing this forum: Bing [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited