Went to the track thursday and got paired up with a new 6,1 Challenger, I had my 180 lb nephew in the car with me,I didnt go all out because you arent supposed to go over 8,60 with a passenger,,,I went 8.589 and the NEW Challenger went 8.889,I was thrilled,,,Charger driver wasnt,he cut a ,022 lite and I got my best yet a .003,happy Guzzi Mark

Wow, exactly .300 quicker ET plus an oh-one-nine hole shot. Good job!

_________________
Joshua

Yeah I went heads up with a 6.1 challenger in the dart one time in the 1/8th. I wasnt sure if the guy did not know how to drive or what but he was faster than me after the 1/8 mile mark for sure.

Of couse my dart is about a second slower in the 1/8th than you Mark, So I think the dude I raced was sittin and spinnin a lot:)

Either way it makes you feel all warm and fuzzy inside to see a slant car keep up with one of those!


Greg

_________________
http://www.youtube.com/hyperpack

The 6.1/5.7's are not that fast through the 1/8th mile, but hang on at the 1/4 mile mark.

What were both of your MPH?

8:58 is honkin' right along for a Slant car on motor only.

I got to spend a couple days driving the girlfriend's '06 Hemi R/T Charger. Even with the anti-spin on it is tough to launch. If it spins it seems to go straight into second gear, and until it gets over 4000 in second you can almost push faster than it runs. After that though, hang on. It's a lot of fun for a 2 ton ugly-azz 4 door car.

_________________
Official Cookie and Mater Tormentor.

My 1/8 MPh is 74 ish.


Greg

_________________
http://www.youtube.com/hyperpack

my 1/8th mph is usally 79 or 80,on that run it was 76.26,his was 83.33,Mark

My 60 ft was 1.780 his was 2.152,so I think I was hooking better than him,mark

_________________
Official Cookie and Mater Tormentor.

if you're spinnin then you aint goin!





Greg

_________________
http://www.youtube.com/hyperpack

Thats great to hear you kept up with him and won!
I think the 6.1 Challenger runs 13.8 in the 1/4 from the factory if I remember right.

Useing a on line calculator,his 1/8 to 1/4 time is 13.73 which I think is about right,he had a aftermarket intake and Borla exhaust,,,,mine calculated out to 13.34 somewhat optimistic I think,Mark