Anyone in need of ARP products? I am thinking of buying some things and would be willing to do some legwork to see if this is feasable. Any suggestions would be welcome. Thanks, Wayne.

_________________
66 Lil' Red Piggie Valiant (Mater Crusher) - Thanks Zilla!!!!! 72 Demon (Number 1 Son's)

I would be interested in 2 complete engine sets and an extra rod set.
Frank

_________________
Scrapple: Because a mind is a terrible thing to waste.
73 Duster - Race Car
66 Dart Wagon - DD
178" FED
82 D150
All Slant powered

I'm interested. Let me know what you come up with!

CJ

_________________
Part of Tyrde-Browne Racing

I''m in the market for Head bolts, Rod Bolts and Main Cap Bolts - and one of the Nice ford Cam bolts for the Slant Cam buttom.

Greg

_________________
http://www.youtube.com/hyperpack

Im interested in head ,rod,and main bolts.

_________________
1960 Hyper-Pac Valiant(rolling test-bed)
1963 Valiant V2OO(Son's summer project,- he just turned 15 )
1972 Valiant 4dr(Daughter Kelly's repair in progress)
1974 Valiant (v8) daughter Kelly's work in progress

let me know pricing that you can get on main and head bolts, already have the rod bolts

I'd be interested in a set. You can't go wrong with ARP products. I figure if I build something I might as well build it as stout as possible.

_________________
Thanks Mike

Lowbudget, that is my thinking as well. I have located a truck crank, two BH blocks to choose from, and will be going the k1/Wiseco route. Ordering the ARP goodies may be overkill but I would much rather over-engineer this than go conservative.

Guys thank you for the interest. Maybe more will join in today. Next week I was thinking about contacting ARP directly and see if they could recommend one of their jobbers/venders that might like to work with us. Thanks again, Wayne.

_________________
66 Lil' Red Piggie Valiant (Mater Crusher) - Thanks Zilla!!!!! 72 Demon (Number 1 Son's)

Depending on pricing and my finances at the deal time, I would be interested in `1 head stud set and 1 rod set.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

I'm interested in a set of head studs, and a set of head studs for the aluminum engine. If main studs are available for the Alum engine, then those too.

Lou

_________________
Home of Slant6-powered fun machines since 1988

I'd be in for a set of head, rod & mains...particularly the ones that allow attachment of a windage tray, I saw that Doc used these somewhere on this site but cant locate the picture.
Maybe 2 of those cam button dealies as well.

_________________
<img src="http://farm4.static.flickr.com/3173/2992308402_5481afb26e_t.jpg">

I am very interested.
Head studs
rod bolts
mains

I am in for the same as Greg: Head studs, Rod bolts and Mains

Pencil me in for the same.....head studs, rod bolts and mains. My budget at this time may not allow it, but it depends on the price.

Roger

I'm interested, the "works", same as above

_________________
1973 Plymouth Valiant
1953 Dodge Panel