I have to replace some of the bulkhead terminals on my wagon so does anybody have a good place to buy them at?

Looking to purchase both the female/male ends.

Thanks,
Bill

_________________
1966 Plymouth /6 Valiant Wagon
1969 Plymouth Road Runner

I don't have a part number but I do know that Napa can(or could)get these.It might take a parts guy that knows his stuff and how to use a paper catalog but it can be done.Some one will probably have another place to get these pieces,I'll keep digging.

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed

Go scrutinise pages 43 and 44 of the Terminal Supply Co catalogue.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Going to put order in for the termianls and might just as well get the correct tools.

Thanks SSD and 6SV

Bill

_________________
1966 Plymouth /6 Valiant Wagon
1969 Plymouth Road Runner

Great company. Thanks, Dan.

Lou

_________________
Home of Slant6-powered fun machines since 1988

Yep. I met them last year at the PRI show, and the have given me great service. Stopped by their spot this year, to thank them.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

Carquest has terminals 5 pieces in a pack, part number TA708 for female
and TA709 male terminals

Napa part# NW725166,NW725167, sheesh .99cents ea.

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed

Here's a link to some sites and info that might be of interest to some on parts/tools and proper wire crimping.Warning,lots of stuff
http://www.vannin.com/threads/ubbthread ... Post245617

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed

Yep they are a good co.and only about 75 miles from my place.

The terminals are .23 apiece be less if you buy them 100 at a time.

Then I go into the Bow-tie dealer I run cars for and ask the service manger if he has any packard crimping tools and he pulls out a2 boxes with 3-4 crimpers in each box and I give him the number that makes the 2 crimps in 1 step and pulls it out and says take it home with you.

So I can get the tool anytime I need it.

Saves about $125.00

Will be down state to Terminal supply next week and pick up the needed terminals.

Very nice person on the phone and she told me can buy just 1 or what ever number you want.

Bill

_________________
1966 Plymouth /6 Valiant Wagon
1969 Plymouth Road Runner

These are Packard Series 56 connectors. The terminals and tools are available from Waytek Wire: http://order.waytekwire.com/cgi-bin/lan ... (S0020):01

Search for delphi/packards metripak-56

Scott M.