im lookin for 9in drums for the front but i cant seem to find them anywhere does anyone know where i can find them or know a part # by any chance, I would really appreciated thanks

I have some for sale from a '63 Dart, I just took them off for the HK disc conversion. They can be turned, I also have the spindles.

,Cliff

_________________
'72 4 dr Dart
'63 4 dr Dart

Rock Auto has them $19- $34 Dollars 3 choices Plus you can get a 5% discount see the slanted network forum for the discount code

Brian

_________________
63 Plymouth Valiant Wagon

i only found the rear on rockauto, im looking to buy new ones

Look up the 9" drums for younger cars (64,65,66...) until you find them. Don't go past 72,73 or the bolt pattern isn't correct. (check the 'info')

Sometimes the lookup isn't complete for various models, so lookup other a-bodies, and different engines to find your parts.

If you go far enough, you'll find finned drums.

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

I looked them up for a 63 valiant

Brian

_________________
63 Plymouth Valiant Wagon

How about wheel cylinders? Rock auto (and nobody else so far) carries them for my '62 Savoy (9" manual drums fore and aft). Anything cross? I'm upgrading eventually......but I need functional brakes kinda now

_________________
Rob

'62 Plymouth Savoy Wagon
'64 Chrysler 300
'47 Farmall H
Merlins are cool
Radials rule
Jets drool

I want to point out a 62 savoy has 10 or 11 inch brakes not 9 inch I am not sure about 62 but I know 61 had total contact brakes with 2 wheel cylinders on each wheel

Brian

_________________
63 Plymouth Valiant Wagon

er...your right....they're 10"

_________________
Rob

'62 Plymouth Savoy Wagon
'64 Chrysler 300
'47 Farmall H
Merlins are cool
Radials rule
Jets drool

for the front does the drum and wheel hub come as one assembly or are they separate

separate The original factory front drums were an assy if your drums are factory originals you will have to cut or grind off the swaging around the studs to replace the drum if you try to press out the studs without doing this you will ruin the hubs the stud holes will be oversize. I know this because I had a machine shop do this to my original hubs

Brian

_________________
63 Plymouth Valiant Wagon

well that makes a lot of sense.... might also be why ive been havin such a hard time finding those front drums