Can anybody tell me what size speaker goes in the dash of a '66 Dart? Need a new speaker, but don't want to pull it if I don't have to and couldn't find the info in the FSM.

_________________
'66 Dodge Dart

My 64 had a 6x9......

But a modern big magnet 6x9 speaker wouldn't fit (too big of a magnet)


You might want one of these 2 for 1 brackets (a member here sells them) so it fits, and so you can get the 8 ohms resistance the older radios want.

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

I'm looking at the 6x9 offered by http://www.turnswitch.com/speakers.htm

Has anybody dealt with these guys? $40 for a decent (better than OEM) speaker that fits well without mods seems very reasonable.

_________________
'66 Dodge Dart

4" × 10" or 5" × 7". Replacements available here.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Your old speaker can be re-cored, that is, a new paper cone installed by most automotive “old radio restoration shopsâ€￾. HMN.com will have a list of these under “Servicesâ€￾.

_________________
67' Dart GT Convertible; the old Chrysler Corp.
82' LeBaron Convertible; the new Chrysler Corp
07' 300 C AWD; Now by Fiat, the old new Chrysler LLC

Two questions using twin speakers with original radio (65 Dart for me):
1) maximum speaker mounting depth to avoid wiper linkage, etc?
2) 4 ohm 4 inch speakers wired in series ok?

_________________
1965 Dart 110k, 225, Carter BBD Super Six, 2 1/4 single exh., sbp manual scarebird front disc, 7 1/4 rear 2.94 sure grip, 14 x 4.5 OEM wheels, 833 OD with hyd. throwout bearing, HEI, electric fan, ram air/heated air, Accusump. http://plymouthcarclub.com/

1) don't know
2) yes

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes