As the title says... Would you reccommend using the remflex manifold gasket with headers?

I have seen the gaskets and used them in another situation that worked well, but I'm wondering if they'll just encourage the header flange to warp, by giving them a "soft" surface to bolt to?

Thanks

_________________
'81 W150 on Propane... Oversize valves, Oregon Camshaft cam, 10:5 static CR, Distributorless ignition, megajolt timing controller, PowerTrax lockers.

That is what they were designed for...

My son has used them on his headers and raced the car for over 5 years with no problems. In fact they have outlasted the Mr Gasket brand and many others.

_________________
Aggressive Ted

http://cid-32f1e50ddb40a03c.photos.live ... %20Swinger


74 Swinger, 9.5 comp 254/.435 lift cam, 904, ram air, electric fans, 2.5" HP2 & FM70 ex, 1920 Holley#56jet, 2.76 8 3/4 Sure-Grip, 26" tires, 25+MPG

Ok. I wasn't talking about how well the gasket lasted, but if there was danger of damaging (warping) the header flange. I'm using them on a 4x4 truck that's going to get regular harsh usage, 4x4 trails, etc.

Anyway, thanks for the input.

_________________
'81 W150 on Propane... Oversize valves, Oregon Camshaft cam, 10:5 static CR, Distributorless ignition, megajolt timing controller, PowerTrax lockers.

I think they will work fine - The Remflex Will not damage your header flange.




I really like their product(s).


Greg

_________________
http://www.youtube.com/hyperpack