Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sun Dec 01, 2024 1:06 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 13 posts ] 
Author Message
 Post subject: Offenhauser 2 1bbl setup
PostPosted: Tue May 08, 2012 2:18 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
I've decided to go with a dual 1BBL offy intake for my 225 (with Dutra Duals).

Does anyone recommend the Holley 1920 or Carter BBS, one over the other?

Does SlantSixDan or anyone, have matched set of either for sale?

Thanks All,

'67 Dart 270


Top
   
 Post subject:
PostPosted: Tue May 08, 2012 2:36 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24447
Location: North America
Car Model:
There's a case to be made for the 1920, the BBS, the 1945, the WA3, and other carbs on the Offy twin 1bbl setup. The most important thing is that the two carbs be exactly matched. Send me a PM and I'll see what I can dig up. Setup notes for the twin 1bbl are here.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Wed May 09, 2012 5:41 pm 
Offline
Board Sponsor
User avatar

Joined: Wed Nov 06, 2002 1:57 pm
Posts: 2207
Location: Everett, WA
Car Model:
A pair of these http://stoveboltengineco.com/catalog/st ... ct=1222026 would be interesting.

They sell them for the 235 chevy.


Top
   
 Post subject: dual carbs
PostPosted: Wed May 09, 2012 10:20 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
How did you find these? Is it $180 for the pair?

Are they enough CFM's if they were intended for a 97 cu. in. engine?

I'm intrigued for sure...I suppose they'd fit an offy manifold, even if I needed adapter plates...

brian


Top
   
 Post subject: dual carbs
PostPosted: Wed May 09, 2012 10:28 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
For that price, it's almost a no brainer to try them...

Might even be better than dual 1920's or BBS's....


Top
   
 Post subject:
PostPosted: Sat May 12, 2012 10:07 am 
Offline
Board Sponsor
User avatar

Joined: Wed Nov 06, 2002 1:57 pm
Posts: 2207
Location: Everett, WA
Car Model:
The carb pads on the Offy are more then big enough to drill for these carbs. No adapter needed.


Top
   
 Post subject: carbs
PostPosted: Sat May 12, 2012 12:32 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
..and these are progressive carbs, designed for a 98cc engine, so two of these would be perfect for a slant six. At low R's no issues with too rich a mixture and at higher R's, likely all one would need. Like a small four barrel but better flow with the dual offy...can't wait to set it up!

BG


Top
   
 Post subject: kick down linkage
PostPosted: Sat May 12, 2012 8:21 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
Anyone know how to hook the kickdown linkage when using the offy manifold with two carbs?

bg


Top
   
 Post subject:
PostPosted: Sun May 13, 2012 4:03 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16793
Location: Blacksburg, VA
Car Model:
You either rig up a kickdown cable, or run w/o one and lock the KD lever back about 1/2-2/3 of the way.

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
 Post subject:
PostPosted: Sun May 13, 2012 8:27 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24447
Location: North America
Car Model:
Quote:
You either rig up a kickdown cable, or run w/o one and lock the KD lever back about 1/2-2/3 of the way.
The latter suggestion is a good recipe for slow-cooked transmission, yum. Do the job completely and correctly. Working throttle pressure ("kickdown") linkage of some kind is necessary, whether it's a stock-like rod setup or a cable setup. See this thread for some aftermarket kickdown options.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Sun May 13, 2012 8:29 am 
Offline
Poser
User avatar

Joined: Thu Nov 29, 2007 3:18 pm
Posts: 3128
Location: Indy
Car Model:
What is the cfm rating for these carbs (stovebolt webers) ?

_________________
66 Lil' Red Piggie Valiant (Mater Crusher) - Thanks Zilla!!!!! 72 Demon (Number 1 Son's)


Top
   
 Post subject: kickdown linkage
PostPosted: Mon May 14, 2012 2:23 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
Thanks so much, definitely want a complete and well done setup, I was just asking how others might have done the kick down. Thanks for link!

BG


Top
   
 Post subject:
PostPosted: Mon May 14, 2012 2:51 pm 
Offline
Guru
User avatar

Joined: Mon Oct 14, 2002 4:32 pm
Posts: 4880
Location: Working in Silicon Valley, USA
Car Model:
You run a rod thru the two posts, already casted into that intake, then make some pieces to connnect it to the trans KD lever.
DD
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited