You can count me in for one. I think it is the best way to go for the Duster.

_________________
Ryan Covalt
62 Plymouth Valiant Race Car 2170# 11.008 @ 117.65 MPH 1/4 Mile Best
72' Dart Swinger Street Car, 4 spd, 3330# 14.061 @96.58 1/4 mile Best

Thanks, Ryan!

Updated list for a Wilcap /6-Chevy trans adapter kit:
--------------------
1) Lou Madsen
2) Joshua Skinner
3) 65 Dartman
4) Rob Simmons
5) akbmotorsports
6) Brucehockensmith
7) Ryan Covalt
8 ) Brooks
9) 805moparkid?

Confirmed 8 buyers. Need 2 more for discount!

ALSO:

Is there interest or preference for putting the starter down at the SB Mopar V8 location? Personally, I would prefer this, but folks with some types of headers may want the stock location. If you doing a turbo install, or Dutra Duals on front and back, the low starter will make this much easier.

Thanks,

Lou

_________________
Home of Slant6-powered fun machines since 1988

Bump. See edited post just above, with question and updated list.

Lou

_________________
Home of Slant6-powered fun machines since 1988

Hmmm... I haven't put enough thought into this yet to have a preference on starter location, but I would lean toward the SB Mopar lower location to allow for future upgrades...

_________________
Rob

I’m Mater
The Kentucky Poser

I made it! Thanks Chuck!

I'd prefer the small block starter location...

Brooks

_________________
Brooks

'72 Dart Swinger
'71 Plymouth 'Cuda

Cheap, Fast, Reliable
Pick 2!

Low starter position for me please.

_________________
Joshua

Lou, will that lower location work with the Clifford shorties? I can't see any long tube headers working with that starter location. Of course I may be totally wrong.

Rick

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Rick,

You can't ask questions if you're not on the list! Duh!

_________________
Rob

I’m Mater
The Kentucky Poser

I think the low starter position will be ok for whitney's car. I am more than likely going to run dutra's on it anyway.

_________________
Ryan Covalt
62 Plymouth Valiant Race Car 2170# 11.008 @ 117.65 MPH 1/4 Mile Best
72' Dart Swinger Street Car, 4 spd, 3330# 14.061 @96.58 1/4 mile Best

Who do you think will be working on Ryan's stuff? His headers are hanging in my garage as we speak.

And by the way Mr. smarty pants! If you can't make it down the drag strip with 3 gears, why spend $1500-2000 to have 4 gears! Take that!

Rick

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

I think low starter would be fine.

_________________
65 Dart station wagon slant 6 - now under construction
47 Dodge Custom 4 Door sedan
87 D100 Short Bed slant 6

Retired USAF 1966-1986
Retired US Postal Service 2004-2014

[quote] I am more than likely going to run dutra's on it anyway.[quote]

Ryan, just sell the headers to Rob, He needs them!!

Rick

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

This ain't fer a "Racin' Car"! It's fer a cool street car what might get raced sometimes! So there!
Don't neither. I got me some other ones... Nanny Nanny Boo Boo...

(How much you want fer 'em though...? )

_________________
Rob

I’m Mater
The Kentucky Poser

lou, thanks for the leg work.

i guess i will go along with the low mount since that seems to be the way everyone is going.

can someone post a pic of an engine with the low mount as i just dropped the engine back in the truck to fab up the exhaust and i am not familiar.


thanks, andy.

_________________
84 D100 /6 long rod 225
86 D100 /6 my sons w/offy intake/weber carb
2016 buick regal turbo

Dad, Thanks for volunteering to help work on another one of my cars!! I'm thinking the dutra setup will be better to just put on and not have to worry about ever again. Her car isn't going to be a race car....... more of an air conditioned, fuel mileage, daily driver...... and tow car that hauls the valiant to the race track.... then gets raced at the track too. Looking for the most reliability for this one. This car is going to be quieter, better mpg, and more reliable than my Dart hopefully. I am hoping the 200r4 will hold up towing??

Rob, I honestly have no clue what i'm going to do with the headers but if I decide you will be the first to know! I have so many ideas and projects that I have no clue what i'm actually going to end up with.

I really am hoping to tow the race car with the Duster with the 200r so do you think the 200r4 is up to the task? I was thinking it would be if built properly but any of your opinions would be great.

_________________
Ryan Covalt
62 Plymouth Valiant Race Car 2170# 11.008 @ 117.65 MPH 1/4 Mile Best
72' Dart Swinger Street Car, 4 spd, 3330# 14.061 @96.58 1/4 mile Best