Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Wed Dec 25, 2024 4:43 pm

Unanswered topics | Active topics


» » Tech Q & A » Suspension & Brakes

All times are UTC-08:00



Post new topic  Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
carrigan #3
 Post subject: Disc conversion
PostPosted: Wed Jan 16, 2013 1:01 pm 
Offline
TBI Slant 6
User avatar

Joined: Sat Aug 20, 2005 7:43 pm
Posts: 153
Location: Groton, CT
Car Model:
Hello all, I'm doing a disc conversion on my 71 and I found a 74 donor in great shape. Got the uca's spindles and calipers. I can also get the rotors for $15 each. Is it worthwhile or should I just get new ones? What should I look for on the used rotors that would make it worthwhile? Thanks!

_________________
My Dart
GO VOLS!
It's not rocket science, we're just splitting atoms.
Top
   
Reply with quote  
Slanted Opinion
 Post subject:
PostPosted: Wed Jan 16, 2013 2:05 pm 
Offline
Turbo EFI
User avatar

Joined: Tue Feb 22, 2005 5:35 pm
Posts: 1044
Location: Maine
Car Model:
Get new ones. The old ones may be warped, and you'll never know that until you step on the brakes that first time.

After all that work you might as well have new rotors and pads!

- Mac
Top
   
Reply with quote  
DusterIdiot
 Post subject: I would also get...
PostPosted: Wed Jan 16, 2013 5:58 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
The LCA's if your car was 9" drum brake equipped, or if the car had a sway bar...

Also check the 74 torsion bars...you might get lucky if a V-8 car and snag a set of 892/893 bars which would be an upgrade from that standard V-8 bar and 2 steps up from the standard pre-73 slant six bars...

-D.idiot
Top
   
Reply with quote  
carrigan #3
 Post subject:
PostPosted: Thu Jan 17, 2013 4:43 am 
Offline
TBI Slant 6
User avatar

Joined: Sat Aug 20, 2005 7:43 pm
Posts: 153
Location: Groton, CT
Car Model:
So do I need the LCA's or is it just nice to have them? I'm doing a front end rebuild so I will get all me ball joints... Thanks again! PS my car does have 9" drums now.

_________________
My Dart
GO VOLS!
It's not rocket science, we're just splitting atoms.
Top
   
Reply with quote  
DusterIdiot
 Post subject: Steering stops
PostPosted: Thu Jan 17, 2013 5:55 am 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
The LCA steering stops are shaped differently between the 1967-1972 LCA and balljoint connection and the 1973-1976...If you keep your LCA, you will test fit the assembly then breakout the grinder and go to town on the stops on your LCA...

-D.Idiot
Top
   
Reply with quote  
carrigan #3
 Post subject:
PostPosted: Thu Jan 17, 2013 7:26 am 
Offline
TBI Slant 6
User avatar

Joined: Sat Aug 20, 2005 7:43 pm
Posts: 153
Location: Groton, CT
Car Model:
Good to know thanks!

_________________
My Dart
GO VOLS!
It's not rocket science, we're just splitting atoms.
Top
   
Reply with quote  
robertob
 Post subject: Re: Steering stops
PostPosted: Thu Jan 17, 2013 8:34 am 
Offline
EFI Slant 6
User avatar

Joined: Thu Jul 24, 2008 11:37 am
Posts: 411
Location: Brooklyn, NY
Car Model: 1964 Valiant V200
Quote:
The LCA steering stops are shaped differently between the 1967-1972 LCA and balljoint connection and the 1973-1976...If you keep your LCA, you will test fit the assembly then breakout the grinder and go to town on the stops on your LCA...

-D.Idiot
Good to know - I've done the swap 3 times and I did not know about this. Do you get less or more turn with the early LCAs? Is the 63-66 LCA different?
Top
   
Reply with quote  
DusterIdiot
 Post subject: Less
PostPosted: Thu Jan 17, 2013 10:13 am 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Quote:
Do you get less or more turn with the early LCAs
Less thus the need to reshape the stops...

-D.Idiot
Top
   
Reply with quote  
robertob
 Post subject:
PostPosted: Thu Jan 17, 2013 10:33 am 
Offline
EFI Slant 6
User avatar

Joined: Thu Jul 24, 2008 11:37 am
Posts: 411
Location: Brooklyn, NY
Car Model: 1964 Valiant V200
That make so much sense. But I'm OK with that because it keeps my tires from rubbing on the swaybar. But now that you mentioned it I am going to do some checking.
Top
   
Reply with quote  
carrigan #3
 Post subject:
PostPosted: Thu Jan 24, 2013 5:11 am 
Offline
TBI Slant 6
User avatar

Joined: Sat Aug 20, 2005 7:43 pm
Posts: 153
Location: Groton, CT
Car Model:
I got the spindles, UCA's, calipers. Now I'm looking at doing a front end rebuild. Looking at the kits, I know that I need the larger 73+ ball joints, but are there any other differences I should be aware of (bushings, etc.) that could present an issue for installing on my 71?

_________________
My Dart
GO VOLS!
It's not rocket science, we're just splitting atoms.
Top
   
Reply with quote  
Doc
 Post subject:
PostPosted: Thu Jan 24, 2013 9:01 am 
Offline
Guru
User avatar

Joined: Mon Oct 14, 2002 4:32 pm
Posts: 4880
Location: Working in Silicon Valley, USA
Car Model:
Quote:
That make so much sense. But I'm OK with that because it keeps my tires from rubbing on the swaybar. But now that you mentioned it I am going to do some checking.
I tend to "adjust" the steering stop (travel) on all LCAs I deal with...
That extra steering travel comes in handy for "tight spots, u-turns and over-steer "correction".
DD
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 11 posts ] 

» » Tech Q & A » Suspension & Brakes

All times are UTC-08:00

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited