Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 29, 2024 11:28 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
 Post subject: JW ULTRABELL FOR /6's
PostPosted: Sat Apr 13, 2013 3:33 pm 
Offline
1 BBL (New)

Joined: Sat Apr 13, 2013 10:33 am
Posts: 1
Car Model:
I've been in contact with JW transmissions to make an ultra bell so we can put 998's, 999's, and a500 overdrive units behind our /6's. They need to have enough requests to produce it. Any help from the rest of you guys would be greatly appreciated. Please send them an email or give them a phone call. I got in contact with andyf from arengineering for an adapter plate, but he got rid of his equipment to produce it.


Top
   
 Post subject: But...
PostPosted: Sat Apr 13, 2013 4:55 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
If you did your .org search, Andy sold the cad/cam files to me and as typical only 3 people wanted them, but for that small of a run the cost was out of the typical end user's pocket, and making a cost effective run of 10 units left me with holding the bag on 7...so.. I believe I sold the cad/cam files to Doctor Injector (lock stock and smoking barrels they are now 100% him) and he would be able to tell you what the plan is for them. Currently since a fair amount of people tossed in on the 200R4 adaptor there may not be that many who will pitch in for the A-500 adaptor at this time (especially since the A-500 requires a fair amount of cutting on the floor pans to fit right compared to the 200R4).

FYI.

-D.Idiot


Top
   
 Post subject:
PostPosted: Sun Apr 21, 2013 2:40 pm 
Offline
EFI Slant 6

Joined: Thu Jul 31, 2003 7:54 pm
Posts: 341
Location: Oregon
Car Model:
I still get requests for those adapters on a fairly regular basis. I didn't know you had passed the design on. I've been sending people to you.


Top
   
 Post subject: Yep...
PostPosted: Sun Apr 21, 2013 4:56 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Quote:
I still get requests for those adapters on a fairly regular basis. I didn't know you had passed the design on. I've been sending people to you.
I appreciate it, but there just wasn't enough interest to get a full run going (out of the 6 requests I got over the last 2 years 3 of them asked if it was going to cost over $200...so that was a bust there). One of our members made a deal and he owns the files/designs wholesale now. I'm not sure about his disposition on making a run, but at least members know who to contact now if they are looking for one.

Good to hear from you Andy,

-D.Idiot


Top
   
 Post subject:
PostPosted: Mon Apr 22, 2013 5:31 am 
Offline
EFI Slant 6
User avatar

Joined: Sun Jun 10, 2012 3:54 pm
Posts: 349
Location: Terre Haute IN
Car Model:
Never thought to put the 200R4 behind the slant, even though I looked at it for my chevy 235. :roll: Alaways a day behind on thoughts it seems. Good to know that ppl have done it though.

_________________
225, Offenhauser, Holley 350, A833OD, 3:55, GM HEI,99 Durango starter
BOOSTED! WH1C, BIG FMIC, 10#
Operation Noble Eagle 03-05
Operation Iraqi Freedom 05-07
Operation Enduring Freedom 12- 13


Top
   
 Post subject: ???
PostPosted: Mon Apr 22, 2013 7:33 am 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Quote:
Never thought to put the 200R4 behind the slant, even though I looked at it for my chevy 235.

http://www.slantsix.org/forum/viewtopic.php?t=49595

I take it you missed this thread altogether?


Top
   
 Post subject:
PostPosted: Mon Apr 22, 2013 8:52 am 
Offline
EFI Slant 6
User avatar

Joined: Sun Jun 10, 2012 3:54 pm
Posts: 349
Location: Terre Haute IN
Car Model:
I must have. :roll: I know I just really started reading and looking here within the last month even though I created an account almost a year ago. Last post was Mar 10th so I probly did overlook it somehow. Maybe next up Ill do an FAQ page on diff trans to /6 (t5,200r4,nv,etc) That way the ones that have so many pages (11 in this case) dont get lost and can be referenced. Id think with 11 pages almost all /6-200r4 questions would be answered. Thanks D.I. for the link.

_________________
225, Offenhauser, Holley 350, A833OD, 3:55, GM HEI,99 Durango starter
BOOSTED! WH1C, BIG FMIC, 10#
Operation Noble Eagle 03-05
Operation Iraqi Freedom 05-07
Operation Enduring Freedom 12- 13


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited