I see the second photo did not post with the first so here is a close up of the coil and module..thanks

_________________
If only I had the time to do what I want to do instead of what I have to do!

When your in Photobucket looking at your pic, look at the right menu box called image links. Near the bottom of that box you will see a link named IMG code. Click on that code and it should say copied and change colour. Now, go to your post reply here (\6 forum) and right click in the reply box. Choose paste from the menu. The code from photobucket will now be pasted in your reply and the picture should appear in the post when you submit the reply.


Oh, nice job by the way!

_________________
Mattelderca
78 NYB (gone now), two S series, three old Snow Cruisers and a Doo.

_________________
If only I had the time to do what I want to do instead of what I have to do!

Hi valiant effort, that is one very nice and clean looking coil bracket you have. It is difficult to see in the photo, but is the coil bracket and heat sink in one piece? Can you please supply a source, P/N and price for the bracket?

Olaf

_________________
Aspenized

_________________
Mattelderca

78 NYB (gone now), two S series, three old Snow Cruisers and a Doo.

_________________
If only I had the time to do what I want to do instead of what I have to do!

Matt,

Thanks for the tip on photobucket..worked great

_________________
If only I had the time to do what I want to do instead of what I have to do!

_________________
Mattelderca

78 NYB (gone now), two S series, three old Snow Cruisers and a Doo.

I'm ashamed to admit i found my problem.
it was the really cheap horrible freight timing light.
I borrowed a quality one an my timing is dead consistent.
Im adding timing light to my list of tools to not buy cheap.

_________________
63 Valiant Wagon
225 - 4 bbl