Anybody know where to find the manufacture date stamp on a slant 904? I was told that the one I have came from a 71 Duster.But it's painted blue so I'm guessing it's a reman.I know it's a 68 up because of the converter.

I think on the later 904's that the part number and 10,000 day calender date code is stamped near the top of the driver's side pan rail.

-D.Idiot

My brother just looked over my shoulder and started laughing that I was posting to a guy named Romeo that needed a date...there goes my evening.

Romeo,
Should be on the left side/drivers side above the pan on the main body of the trans....Or in other words on the left side pan rail. It will need to be deciphered and I will try to find the link for you with that info.

Thanks to ALL

This link has a calender calculator, just enter the number (no commas)

http://maxwedge.com/articles/10k.php

Good Luck!

COOL,the cleaning will start tomorrow.Oil and desert sand hardens like concrete after 40 years.Thanks again for the help.

Comes out to be August 1 1972, Close enough for me.Should have the part throttle kickdown in 72.

Should, but don't count on it. I have taken apart several mid to late 70s 904 and most of them didn't have the PTK. I think I only found one out of the four that did. If you need one, T-Flite Patty as an eBay store and can hook you up quick and easy.

_________________
Casually looking for a Clifford hyperpak intake for cheap.

Typical Chrysler.Never say yes or no, just could be. Thanks !

That should be near the start of the run for the new 1973 model cars coming out in September of 1972...

Check this out
http://www.mymopar.com/downloads/transguide.pdf

Richard

_________________
Part of Tyrde-Browne Racing

Thanks Richard, found it on that chart too to conferm.