Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 21, 2026 6:05 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 13 posts ] 
Author Message
 Post subject: rigged up shifter
PostPosted: Fri Mar 28, 2014 9:36 pm 
Offline
Turbo Slant 6
User avatar

Joined: Fri Apr 27, 2007 5:50 pm
Posts: 745
Car Model:
has anyone tried to attach a shifter to the back of a transmission that doesnt have the bosses? like some kind of bracket that can be strapped on the tailshaft to bolt the shifter to.

_________________
1966 Plymouth Valiant, 225, 3 on the tree, 8 1/4 3.21 sure grip, hyperpac, holley 650dp, holset h1c
Image


Top
   
 Post subject:
PostPosted: Fri Mar 28, 2014 11:29 pm 
Offline
Board Sponsor
User avatar

Joined: Wed Nov 06, 2002 1:57 pm
Posts: 2243
Location: Everett, WA
Car Model:
What shifter are you using? The universal 3 speed shifters usually have something that bolted to the tail housing bolts.


Top
   
 Post subject:
PostPosted: Sat Mar 29, 2014 1:13 am 
Offline
Turbo Slant 6
User avatar

Joined: Fri Apr 27, 2007 5:50 pm
Posts: 745
Car Model:
the column shifter. its a manual trans. i would like to put it on the floor. all of the universal kits ive seen come straight back off of the tailshaft bolts. that doesnt work because the cross member is in the way.


Top
   
 Post subject:
PostPosted: Sat Mar 29, 2014 8:37 am 
Offline
Supercharged
User avatar

Joined: Thu Jan 27, 2005 8:32 pm
Posts: 7834
Location: Portland-ish
Car Model: Fiat 500e
Ok, so you've mounted the shifter. Somehow. What about the shift rods that don't fit?

_________________
Joshua


Top
   
 Post subject:
PostPosted: Sat Mar 29, 2014 12:32 pm 
Offline
Turbo Slant 6
User avatar

Joined: Fri Apr 27, 2007 5:50 pm
Posts: 745
Car Model:
i have a complete stock 3spd shifter from a board member that i could use to concoct something. the universals arent going to work. not even close. i had one bolted up on an extra transmission i had laying around to get the rod adjustment right, every one i have drove got stuck between gears. got it shifting beautifully. go to put it in the car and there just is no room with the cross-member in the way.


Top
   
 Post subject:
PostPosted: Sat Mar 29, 2014 2:17 pm 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Fri Nov 08, 2002 4:48 pm
Posts: 5835
Location: Burton BC canada
Car Model:
Dont cut the crossmember without a plan.

_________________
Yeah....Im the one who destroyed this rare, vintage automobile.....

Image


Top
   
 Post subject:
PostPosted: Sat Mar 29, 2014 2:22 pm 
Offline
Turbo Slant 6
User avatar

Joined: Fri Apr 27, 2007 5:50 pm
Posts: 745
Car Model:
im not cutting the crossmember for a three speed. maybe a 5, probably not even then. i dont like messing with structural parts of my car. so no worries there.


Top
   
 Post subject: rigged up shifter
PostPosted: Mon Mar 31, 2014 10:26 am 
Offline
2 BBL ''SuperSix''

Joined: Sun Mar 17, 2013 8:43 pm
Posts: 23
Location: portales
Car Model:
I made one for my A390 trans. It also had a column shifter. I had to use a price of angle iron and bolted it to two bolts on the tail shaft. Im posting from my phone but will post pictures when I figure out how


Top
   
 Post subject:
PostPosted: Tue Apr 01, 2014 1:18 pm 
Offline
Turbo Slant 6
User avatar

Joined: Fri Apr 27, 2007 5:50 pm
Posts: 745
Car Model:
if you want to email me the pictures i can post them. or you can use a photo sharing site. i use photobucket. weesers1006@hotmail.com.


Top
   
 Post subject:
PostPosted: Tue Apr 01, 2014 2:48 pm 
Offline
2 BBL ''SuperSix''

Joined: Sun Mar 17, 2013 8:43 pm
Posts: 23
Location: portales
Car Model:
I'll email them when I get a chance thanks. That transmission do you have


Top
   
 Post subject:
PostPosted: Tue Apr 01, 2014 4:15 pm 
Offline
Turbo Slant 6
User avatar

Joined: Fri Apr 27, 2007 5:50 pm
Posts: 745
Car Model:
lol i dont even know. all i know is it does not have the bosses on it from the factory to mount a shifter on the tailshaft.


Top
   
 Post subject:
PostPosted: Tue Apr 01, 2014 11:11 pm 
Offline
Board Sponsor
User avatar

Joined: Wed Nov 06, 2002 1:57 pm
Posts: 2243
Location: Everett, WA
Car Model:
In that case you will need to fabricate a mount. Most of the universal kits have "stuff" that will allow you to fabricate a mount for the shifter. They may even have directions on how to make that mount. But they will be generic, not specific to your particular application.

In a A-Body the shifter is mounted behind the cross member and the shift lever rods, run across the top of the cross member. This means that you will need to cut hole for the shifter and clearance the floor boards around where the rods run. Then you need to make the mount. When I did this 30 some years ago, I ended up with a reversed shift pattern. Hopefully you will do better.


Top
   
 Post subject:
PostPosted: Tue Apr 01, 2014 11:19 pm 
Offline
Turbo Slant 6
User avatar

Joined: Fri Apr 27, 2007 5:50 pm
Posts: 745
Car Model:
im gonna see what happens. just gonna run the column shift for a while. i have no problems shifting it. its smooth and i can do it quick when im not worried about punching the dash. or i might use doc's idea and just cut the extra tailshaft i have and use some exhaust clamps to hold the bosses on there. i dunno as of yet. just wanna get it running again.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited