Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 21, 2026 7:04 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Wed Apr 30, 2014 6:14 am 
Offline
EFI Slant 6
User avatar

Joined: Wed Oct 01, 2003 11:40 pm
Posts: 478
Location: Eden, NC
Car Model: 1974 Plymouth Duster
I have an A-body 8.75 rearend with 3.23 gears in a 489 case with sure grip. I am assuming the sure grip has either failed or worn out, due to the rear now spinning only one wheel. No unusual noises noted, or vibrations. I have not pulled the center section yet.

After I pull the center section, and determine whether it has the clutch or cone style sure grip, can I simply swap out the sure grip for a new unit without disassembling the center section and having to reset the backlash on the pinion and ring gears?

Any other advice is appreciated as well. I don't know what I don't know. :wink:

Brian

_________________
Flyin' Brian

74 Duster, 225, rear-mounted blow through turbo at 12psi boost, street/strip car
"Sixy Beast"


Top
   
 Post subject:
PostPosted: Wed Apr 30, 2014 7:55 am 
Offline
Turbo Slant 6

Joined: Sun Jul 20, 2008 10:20 am
Posts: 762
Location: St. Louis Park, MN
Car Model:
Changing the differential itself does not require having to adjust the depth of the pinion gear which is a complicated procedure you want to avoid. Once you bolt the ring gear to the new differential (Left hand threads there) you can just drop it in and then you adjust the backlash by moving the ring gear with the bearing adjusters. You measure the backlash with a dial indicator contacting the ring gear tooth. Find the right spec, it is really quite easy to do.

There might be some bearing interchange issues with a differential out of a 741-2 carrier (check on this) but they are basically interchangeable. Good luck Brian.

_________________
If you didn't drive it there, it's not a street car.


Top
   
 Post subject:
PostPosted: Wed Apr 30, 2014 1:03 pm 
Offline
Board Sponsor & SL6 Racer

Joined: Wed Oct 23, 2002 7:57 pm
Posts: 9536
Location: Waynesboro, Pa.
Car Model: 65 Valiant 2Dr Post
It is not really hard at all. If I can do it you know it ain't none to complicated!! :lol: :lol:

PS. If it turns out that it is the cone type and you are going to replace it let me know. Ryan may be interested in buying some parts out of your old unit if you want to sell them. He broke the spider gears in his but the cone style posi was still working good.

Rick

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!
Image
12.70 @ 104.6
Image


Top
   
 Post subject:
PostPosted: Thu May 01, 2014 7:55 pm 
Offline
EFI Slant 6
User avatar

Joined: Wed Oct 01, 2003 11:40 pm
Posts: 478
Location: Eden, NC
Car Model: 1974 Plymouth Duster
Thanks Seymour!

Rick, I will keep that in mind. Might get to it next week.

Brian

_________________
Flyin' Brian

74 Duster, 225, rear-mounted blow through turbo at 12psi boost, street/strip car
"Sixy Beast"


Top
   
 Post subject:
PostPosted: Fri May 02, 2014 3:55 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 9094
Location: Silver Springs, Fl.
Car Model:
My suggestion, is to measure the backlash, before taking the carrier out of the pumpkin. Then set the backlash to the same number, when reinstalling, the new carrier. That will reduce the chance of the rear being noisy.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
 Post subject:
PostPosted: Sat May 03, 2014 10:31 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 17689
Location: Blacksburg, VA
Car Model:
Ditto what Charlie said. That is the key measurement needed for reassembly.

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited