Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 20, 2026 9:08 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 9 posts ] 
Author Message
 Post subject: reared noise (II)
PostPosted: Sun May 04, 2014 5:34 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
I have a 7 1/4 rearend. When I bought my '67 Dart a few years back, the rearend was making noise so I took it to a tranny/rearend shop and they replaced the axle bearings and gear set. After that it was pretty quiet for some time, although the new gear set had a rather subtle hum to it. I assumed this was new gears wearing in or something. Now, after a couple years, it just started making more noise again. It's sporadic, sometimes no noise, sometimes pretty decent hum back there. I'm sure my leaf springs are too soft, so maybe the angle in the drive line isn't optimal.

I have an 8 3/4 rebuilt that I'll put in (still collecting parts), but for now...is there an adjustment in the rearend they didn't get right, do rearends need adjustment in such a short period or is something else likely worn out now?

I'm not having any issues other than the noise, sometimes it's a pretty loud hum, sometimes it's quiet as a church mouse.

BTW, when I swap out for the 8 3/4 there will be a free 7 1/4 rearend if anybody is interested.

Thoughts?

Brian


Top
   
 Post subject:
PostPosted: Mon May 05, 2014 5:41 am 
Offline
Supercharged
User avatar

Joined: Sat Feb 16, 2008 1:25 pm
Posts: 5623
Location: Downeast Maine
Car Model:
Check fluid level.

_________________
67' Dart GT Convertible; the old Chrysler Corp.
82' LeBaron Convertible; the new Chrysler Corp
07' 300 C AWD; Now by Fiat, the old new Chrysler LLC

Image


Top
   
 Post subject: Thanks
PostPosted: Thu May 08, 2014 5:30 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
It's getting louder, I took it in to have it checked...hopefully not too late...


Top
   
 Post subject:
PostPosted: Sun May 11, 2014 3:44 am 
Offline
Supercharged

Joined: Sun Jun 04, 2006 4:53 pm
Posts: 4295
Location: Gaithersburg MD
Car Model:
With the domination of FWD over the last 30 years it is getting harder and harder to find someone who knows how to work on these properly. I am going down the same road now. I paid a lot to have my 8.25 rebuilt and it is still noisy. Let us know what you find out.

Sam

_________________
Image


Top
   
 Post subject:
PostPosted: Sun May 11, 2014 5:42 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 10444
Location: IRWIN PA
Car Model:
Go to some one trustworthy that works on trucks / 4wd's They are alll still ring an pinions in them....


Greg

_________________
http://www.youtube.com/hyperpack

Image


Top
   
 Post subject:
PostPosted: Mon May 12, 2014 3:35 am 
Offline
Supercharged

Joined: Sun Jun 04, 2006 4:53 pm
Posts: 4295
Location: Gaithersburg MD
Car Model:
There is an idea. Thanks. Hope to see you on Saturday.
Sam

_________________
Image


Top
   
 Post subject:
PostPosted: Tue May 13, 2014 9:48 am 
Offline
3 Deuce Weber
User avatar

Joined: Fri Mar 14, 2014 6:04 pm
Posts: 73
Location: Poughkeepsie New York
Car Model:
Sam where did you get your front bumper lip/air dam? Or did you make it? Im inlove :lol:

_________________
19 Years young with a passion for all things old.

"Four doors for more....screaming passangers..(;"

"There's no replacement for displacement, but my \6 is still cooler than your V8"


Top
   
 Post subject:
PostPosted: Tue May 13, 2014 10:52 am 
Offline
Supercharged

Joined: Sun Jun 04, 2006 4:53 pm
Posts: 4295
Location: Gaithersburg MD
Car Model:
There is a thread about it that is maybe a year old. It is a cut down Chebbie pick up spoiler. I'll try do find it later.

Thanks for the compliment.
Sam

_________________
Image


Top
   
 Post subject:
PostPosted: Tue May 13, 2014 1:12 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 10444
Location: IRWIN PA
Car Model:
Quote:
Go to some one trustworthy that works on trucks / 4wd's They are alll still ring an pinions in them....


Greg
When people like that are getting hard to find in your area.. time to learn how to do it yourself.

A few simple tools from http://www.ratechmfg.com/pinion%20setting%20tool.htm can help.



More infos here:
http://www.ratechmfg.com/toc.htm
http://www.ratechmfg.com/chrysler.htm
http://www.ratechmfg.com/myth.htm

I setup my own..
IF it makes noise most likely the Pinion depth is wrong. one of the ratech Pinion depth checkers and a factory service manual can help here.

It does help that I have a press downstairs for pressing the bearings on and off the Pinion Stem. Its not a hard job to do. Just a few tools, micrometer, Depth checker and a dial indactor are all that is needed.


Greg

_________________
http://www.youtube.com/hyperpack

Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited