How do I hold the hoodlining edge in along the roof rail section?

I have two short barb rails that seem to attach to the inside of the roof line above the front doors (while the four door Valiant has longer barb rails that extend to include the rear doors).

Does the trim section on the coupe that screws to the bottom of the roof and holds the roof rail rubber in situ also hold the edges of the hooding?

It has been some years since I removed the hoodling and I can not remember how it was held in along the edges.

Thanks

My '60 FSM shows the headliner pushed up behind the rail with a putty knife and hooking on the barbs.

May or may not be the same for a '61.

If you like, shoot me a PM with your email address and I'll send the scanned pages to you.

_________________
<img src="http://farm4.static.flickr.com/3173/2992308402_5481afb26e_t.jpg">