Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Nov 29, 2024 1:33 pm

Unanswered topics | Active topics


» » Tech Q & A » Engine

All times are UTC-08:00



Post new topic  Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
Shock400
PostPosted: Mon Mar 14, 2016 3:05 pm 
Offline
2 BBL ''SuperSix''

Joined: Mon Dec 14, 2015 1:51 pm
Posts: 16
Location: Pottstown, PA
Car Model: 1963 Plymouth Valiant
Will this work on a 170 exhaust ?

Look at this on eBay:

https://www.ebay.com/ulk/itm/121354580422

BUICK 1940 - 1956 MANIFOLD DAMPER THERMOSTAT COIL

_________________
Douglas Hawkins
Top
   
Reply with quote  
Reed
 Post subject:
PostPosted: Mon Mar 14, 2016 3:37 pm 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13055
Location: Fircrest, WA
Car Model: 76 D100
Here is what you are looking for: CLICK ME

You might try calling NOS parts dealers such as old car parts northwest or Arizona parts and asking for the following part numbers:

3004664

2084797
Top
   
Reply with quote  
Shock400
 Post subject:
PostPosted: Mon Mar 14, 2016 5:09 pm 
Offline
2 BBL ''SuperSix''

Joined: Mon Dec 14, 2015 1:51 pm
Posts: 16
Location: Pottstown, PA
Car Model: 1963 Plymouth Valiant
Kool! I will check that out. I might have to buy that whole unit.
How much of a difference does it make if that unit isn't working? Cause it's hard to tell on mine.

_________________
Douglas Hawkins
Top
   
Reply with quote  
Reed
 Post subject:
PostPosted: Mon Mar 14, 2016 5:38 pm 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13055
Location: Fircrest, WA
Car Model: 76 D100
It can make quite a big difference. The intake manifold must reach and maintain a high operating temperature to assist with eliminating fuel puddling in the intake manifold, especially in colder climate. At the same time, if the flapper gets stuck open it can overheat the intake and cause other problems.
Top
   
Reply with quote  
mcknight505
 Post subject:
PostPosted: Tue Mar 15, 2016 7:44 am 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Tue Mar 01, 2016 6:35 pm
Posts: 17
Location: nm
Car Model:
Di you know at what temperature it goes from normal operating to over heating?

_________________
1982 dodge w150 4 speed
Top
   
Reply with quote  
Reed
 Post subject:
PostPosted: Tue Mar 15, 2016 7:53 am 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13055
Location: Fircrest, WA
Car Model: 76 D100
Nope. Not off the top of my head.
Top
   
Reply with quote  
mcknight505
 Post subject:
PostPosted: Tue Mar 15, 2016 10:11 am 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Tue Mar 01, 2016 6:35 pm
Posts: 17
Location: nm
Car Model:
When is the flapper closed? Turned all the way clockwise or counter clockwise?

_________________
1982 dodge w150 4 speed
Top
   
Reply with quote  
'67 Dart 270
 Post subject: open vs closed
PostPosted: Tue Mar 15, 2016 11:02 am 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
As I recall, the flapper is positioned to let about equal amounts of exhaust gas out and also hitting the underside of the intake manifold, as it heats up it turns clockwise to direct the flow almost entirely to the exhaust pipe, but the downstream end of the flapper still leaves some gap for gas to get to the intake. I measured my intake after warming up one time, I believe it was about 250 F at the runners.

brian

_________________
https://tinyurl.com/yynpj4v2
Top
   
Reply with quote  
'67 Dart 270
 Post subject: AZ parts
PostPosted: Tue Mar 15, 2016 11:27 am 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2132
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
Last I looked (a few months or so ago) Arizona parts had the complete kit for around $90.

brian

_________________
https://tinyurl.com/yynpj4v2
Top
   
Reply with quote  
Shock400
 Post subject:
PostPosted: Wed Mar 16, 2016 4:37 pm 
Offline
2 BBL ''SuperSix''

Joined: Mon Dec 14, 2015 1:51 pm
Posts: 16
Location: Pottstown, PA
Car Model: 1963 Plymouth Valiant
Ok I think I have officially found the hardest part to locate. Only found one so far for $135.

_________________
Douglas Hawkins
Top
   
Reply with quote  
Shock400
 Post subject:
PostPosted: Thu Mar 17, 2016 4:42 pm 
Offline
2 BBL ''SuperSix''

Joined: Mon Dec 14, 2015 1:51 pm
Posts: 16
Location: Pottstown, PA
Car Model: 1963 Plymouth Valiant
Ok folks found a complete set with both springs. For less than $100.

Thanks for the help everyone.

_________________
Douglas Hawkins
Top
   
Reply with quote  
Shock400
 Post subject:
PostPosted: Thu Mar 17, 2016 5:45 pm 
Offline
2 BBL ''SuperSix''

Joined: Mon Dec 14, 2015 1:51 pm
Posts: 16
Location: Pottstown, PA
Car Model: 1963 Plymouth Valiant
Ok folks found a complete set with both springs. For less than $100.

Thanks for the help everyone.

_________________
Douglas Hawkins
Top
   
Reply with quote  
azray
 Post subject:
PostPosted: Thu Mar 17, 2016 10:54 pm 
Offline
4 BBL ''Hyper-Pak''
User avatar

Joined: Thu Jun 11, 2015 3:11 pm
Posts: 33
Location: Phx AZ
Car Model:
Where , any more to be had ?
Business , or Private Party ?

Thanks!
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 13 posts ] 

» » Tech Q & A » Engine

All times are UTC-08:00

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], Google [Bot], Semrush [Bot] and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited