Can anyone help me here?

I want to add 4 way hazard flashers to my 64 dart - What is the correct way to do this?


I also dont want the 4 ways on steady when I put the brakes and hazards on at the same time.


Greg

_________________
http://www.youtube.com/hyperpack

I've got both a pre-65 and 66 A Body factory flasher harness and can take a look for you.

_________________
65 Dart station wagon slant 6 - now under construction
47 Dodge Custom 4 Door sedan
87 D100 Short Bed slant 6

Retired USAF 1966-1986
Retired US Postal Service 2004-2014

I would be Very Interested in this also!

_________________
1964 Dart GT

Signal-Stat "Flarestat" № 127 hazard flasher retrofit kit. Good prices here and here, but no photo, so here's a screen grab from the cattledog:

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Excellent Info - Thank you Dan!


Greg

_________________
http://www.youtube.com/hyperpack

That there is some cool stuff! Let us know how it works out Greg.

I may need to put that on the race car just for fun!!

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

I want these on the 64 because I intend to drive it as well a race it. And it wont be oe anyway so I think it's a wise addition with all of the distracted drivers out there.


Greg

_________________
http://www.youtube.com/hyperpack

Those are good prices ????????

Makes me want to invent my own solution if I were to add flashers......

A pushbutton switch
fuse and holder
heavy duty flasher
2 diodes (to isolate left and right sides)
some wiring

you're done

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

Yeah, they are. We live in 2016. Quality stuff made in America costs more than $3.25 any more.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

That is a nice bit of kit, and consider what your health and safety is worth. I would definitely pay $60 for that part, especially if it is made in the USA.

_________________
Casually looking for a Clifford hyperpak intake for cheap.

I thought $60 was a very good price. Especially for someone without decent electrical skills.

Then again, if you have the skills to build a good one for say $30-40, I'd buy one from you!

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

(…and if it helps, $60 in 2015 dollars is $7.89 in 1965 dollars, $13.48 in 1975 dollars, $27.02 in 1985 dollars, $38.13 in 1995 dollars, and $48.80 in 2005 dollars)

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Don't need diodes...........


http://www.hotrodders.com/forum/simple- ... 81803.html

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

My Signalstat Flarestat Arrived yesterday - It's a groovy piece from the 1960s with some revisions over the years - I like it in that it's simple, stright forward and easy to install.

It will also tie into and flash the dash lights when the hazards are on.

and it's heavy duty / solidly built!

Reminds me of all the aftermarket stuff you see in public works vehicles from the 60's-70's

Just the Vibe want for this build!


Thanks Dan!

Install forthcioming when time arrives in my life!

Greg

_________________
http://www.youtube.com/hyperpack

I got my signal stat-flare stat installed today.

It works but I don't like that when you put the hazard flashers on and then step on the brake pedal all of the hazards stay on sold with no flashing. How do I wire it so the brake pedal does not interfere with the hazard operation?

Thanks,

Greg

_________________
http://www.youtube.com/hyperpack