Okay...I'm attempting to redo the whole front end on my 72 Valiant. Just eyeballing everything, but to make things look relatively straight, one tie rod is adjusted way in and the other way out. Also, if I turn the wheel lock to lock and divide by 2, the wheel is about 90 degrees from straight. Any ideas on where I'm messing up?

_________________
If I was half as smart as I thought I was 30 years ago, I'd be twice as smart as I am now

does a 72 Valient have a 'rag joint' ,,, a fiber disk that resides between the steering column shaft and the steering box shaft, if so sounds like it is 180 out. Uncouple the joint, rotate the steering wheel 180 and put it back together...I had the same issue on the 83 D150 and that is what I did to fix it.

Make the tie rods equal and see if you're closer.

_________________
Official Cookie and Mater Tormentor.

Thanks, I will check both of these

_________________
If I was half as smart as I thought I was 30 years ago, I'd be twice as smart as I am now

No, there is no rag joint in the steering system of a Valiant.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.