Here is a better pic of the setup:

http://s785.photobucket.com/user/67dart ... sort=3&o=2

At least 1/2" or so from spring: http://s785.photobucket.com/user/67dart ... sort=3&o=1

Rear one: http://s785.photobucket.com/user/67dart ... sort=3&o=3

Up over the tranny: http://s785.photobucket.com/user/67dart ... sort=3&o=4

Over to passenger frame rail: http://s785.photobucket.com/user/67dart ... sort=3&o=5


along rail and to radiator: http://s785.photobucket.com/user/67dart ... sort=3&o=6

Close up of (steel) fitting: http://s785.photobucket.com/user/67dart ... sort=3&o=7


-AN to NPT 90 degree fitting: http://s785.photobucket.com/user/67dart ... sort=3&o=8

Get yourself one of these, makes braided lines slip easily into fittings: http://s785.photobucket.com/user/67dart ... sort=3&o=0

Brian

_________________
https://tinyurl.com/yynpj4v2

As an aside...hey GDIZZLE....by the way, didnt mean to hijack your thread.......I figured since it was about the Bouchillion setup it would be good info to have here for someone in the future.....I can start a new thread for my trials / tribulations if preferred....

Do you know what piece of the Bouchillon kit is the same as OEM parts ?

Making progress....we hope....


Fitting one of two found and installed....one left in the whole damn area.....


Female to female swivel still needed, I found on on ebay today for 5 bucks.....hopefully we will be back on track once that arrives....