Hi All
I have a 1966 vc valiant and was wondering if anyone has a CAD file for the K member. I want to do a FEA analysis on it with rack and pinion steering brackets grafted on it . ?
Cheers....Rob

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

I will hazard a guess
Front
End
Alignment

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

Finite Element A? Analysis

I think the A is for Analysis, so you really only need to say is FEA, not FEA analysis.

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

3D modeling software like Solidworks allows you to do stress analysis simulations if you have that as an add-on to the package. It's a worldwide standard for design software that engineers use to design and test or evaluate parts before they actually make them.

_________________
There's no such thing as too much cam....only not enough engine!

So I shouldn't Xerox a copy?

Is that similar to soder or solder ?

I doubt anyone has one of those..

Based on the lack of response etc.

Best bet would be to find an old drafted copy if possible etc and Model one from there.

I think that Putting a Rack on most of the old k Frames with 1/4" Plate would be fine.

Remember that the Old Box and Idler arm was there with thinner metal so I would be confident in the retrofit.


Greg

_________________
http://www.youtube.com/hyperpack