Here is the place to post some things you will be bringing to the banquet that you want to get rid of. We may have some more Mopar 'Nuts" that come out for an indoor swap meet in the middle of winter. Some V-8 guys may come and it will be our job to convert them! see ya in March!

I made a quick glance around the garage and here are some things I will be bringing.

Multiple oil pans- F body and 67-76 A body
4 big bolt rallye wheels, 2 trim rings, unkown if I have centers
2 bolt on front pulleys
multiple valve covers
2 intake and exhaust manifolds single barrels
starters
2.5" dual exhaust tailpipes off 72 swinger
10 crankshaft bolt, lock plates
transmission cooler
Super six air cleaner
2 flywheels
2 barrel parts carb, 2280 I think
1 new, 1 piece intake /exhaust flange for building your own intake / exhaust 1/4" thick
87 truck windshield washer tank

And I'm sure I have more.

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

I haven't had a chance to go through the stuff I want to sell yet, but I will have a ton of different things to sell.

super six setups, 4 barrel intakes, carbs, ignitions, A body parts, transmissions, etc. Rob has already claimed the slantkota but I will have a lot of things to sell for sure. Not sure if i will get time to make a list or not but there will be a lot of things to sell.

I have tables to use to put parts and stuff on so If you are planning to bring stuff to sell send me a PM so I can make sure I have enough set up.

_________________
Ryan Covalt
62 Plymouth Valiant Race Car 2170# 11.008 @ 117.65 MPH 1/4 Mile Best
72' Dart Swinger Street Car, 4 spd, 3330# 14.061 @96.58 1/4 mile Best

Thanks, guys!

I have a few things I can list now.

1) Pair of ~99 Sebring seats with integral shoulder belts
2) 10" rear drums and brake parts - worn but probably useable

I'm sure I will expand my list.

Lou

_________________
Home of Slant6-powered fun machines since 1988

I am planning to bring a few things too. Just dont have them picked yet. It should be good shopping for Slant 6 guru's.

_________________
62 Val, 66 Dart, 16 Ram 2500 Mega

Ditto what Ron just said...

If someone has something they're looking for, post here as well. Some of us may have that thing(s) laying around and just forgot.
(Ain't that right, Joe? )

_________________
Rob

I’m Mater
The Kentucky Poser

Ok ...cool...
I have a set of pistons, n some misc. Parts.
3speed truck trans w/shifter

_________________

joesnow AKA Dan

Ron probably has whatever you might be looking for, but he doesn't know where it is

_________________
O==\=/==O

"A mechanic is Somebody."
- Jim Preston

I got out some of my parts to sell. There are more parts, but here are some pictures of what I dug out so far.

_________________
Ryan Covalt
62 Plymouth Valiant Race Car 2170# 11.008 @ 117.65 MPH 1/4 Mile Best
72' Dart Swinger Street Car, 4 spd, 3330# 14.061 @96.58 1/4 mile Best

Some nice goodies there!

If anyone wants to claim parts that isn’t going to the banquet I can help with parts hauling.

_________________
Rob

I’m Mater
The Kentucky Poser

I also have a12 or 15 gallon plastic fuel tank in my race car I will probably pull and replace with a small one. If any one needs it I could pull it for the banquet.
Also 2 rear sliding windows for D 100 truck.

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Are you still looking for a smaller one, Rick?

I really need to put a list together of stuff I can bring...

I also need to start attending "Hoarders Anonymous" meetings...

_________________
Rob

I’m Mater
The Kentucky Poser

They have aluminum ones on Ebay for $55. So that is what I planned to do. I think I will get a 5 gallon one.

Rick

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Wow Ryan, lots of things I could use...
Wheels, gears, ignition box, 5sp,
I'm bring just a few things...
I might dig deeper to make a few dollars to spend more lol...
Parts swap is a great idea...

Dan

_________________

joesnow AKA Dan

I'm looking forward to this so I can find parts for my roadster project!
I will be reworking the exhaust soon. I think i'm going to have to make my own header if i don't find a pair of Dutra Duals as space is tight. I'm also going to try re positioning the steering box too.

Cool. Will be nice to meet you in person!

Greg

_________________
http://www.youtube.com/hyperpack