The workshop manual advises:

- remove heater push button facia plate, remove push buttons, and then remove 3 screws holding the heater slide unit to the back of the instrument binnacle
- then lower the heater slide unit, etc.

Does anyone know how to remove the 3 screws holding the heater slide unit from the rear of the instrument binnacle without having to stand on your head on the front floor?

Turn the car upside down?

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

A good one!

Then I would have to stand on my head on the headlining. lol

First, fetch a large bottle of bourbon or similar. That's step 1 in just about any behind-the-dashboard procedure on the '60-'62 cars.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

You get used to it.... NOT!

_________________
Hyper_pak

I may never know this joy. In my 62 Valiant, Seymour cut out the original dash and made his own with pretty easy access. The heater has one toggle switch to turn it on, and a little door you can reach down and open or close. A Cadillac, it is not, but it's nice and simple!

Lou

_________________
Home of Slant6-powered fun machines since 1988

ToadRacer heater stuff is REAL easy to get to now...

We're gonna make a simple pull type deal...

Yup, standin' on yer head is just the way of it on most stuff like this. Recruit a youngin' ta hep ya! They're good at that stuff.

Bein' in Kentucky, I kin hep ya with that bourbon stuff Dan suggested if'n ya decide to go that way too...

_________________
Rob

I’m Mater
The Kentucky Poser

For a bottle of pappy's (NEW-FULL, just be clear) I will drive to your house and do it for you. So it's in Robs hands now.

_________________
Hyper_pak

Sweet! We’re on it!

_________________
Rob

I’m Mater
The Kentucky Poser