Here is a Link to a copy of the forged crank Scraper -

https://drive.google.com/drive/folders/ ... sp=sharing

This is the Oil Pump side for a 225 Forged Crank with RG Forged Block

use it to make your own etc.

Let me know if there are any problems.

If you are printing on regular letter paper it will take 3 sheets.

Greg

_________________
http://www.youtube.com/hyperpack

Here is a Laser cut version of the scraper and another shot of it laid out over my tracing of the scraper.








Greg

_________________
http://www.youtube.com/hyperpack

That is awesome. Looks like I will be making one of these scrapers. Anyone have a pattern for a windage tray?

_________________
“Buy the ticket, take the ride.”
― Hunter S. Thompson

Here are some shots of the part modeled on the engine - No Crank or rods to check clearance on but proof of concept.






Greg

_________________
http://www.youtube.com/hyperpack

Greg I have been trying to print this and I can't seem to get it to print right. Only prints one page and it is just a partial scraper. Is there some trick to this?

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Well you have to have a printer that can Print the size of the engine..

Like something at a graphics shop.


I dont think it will print correctly at your home printer.


Greg

_________________
http://www.youtube.com/hyperpack

Ok, I read the quote above and just thought it would print out on 3 regular pages on my printer and I would put them together?

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Open as PDF

then print

Under printer options:

custom scale 100%

poster

It looks like it will print some blanks, just save the paper for later

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

Hey, I tried the same but could only get the center 11" to scale then guessed on the rest. It turned out great. Thanks Greg for the help!!

_________________
10.74 @ 127.47 mph 1320 ft
6.65 @ 107.80 mph 660 ft

http://www.youtube.com/c/turbo66valiant
Follow on Instagram - turbo66valiant
Facebook - https://www.facebook.com/ryan.peterson.737

Glad to be of assistance Ryan!

turn that hairdryer up to 11!

Greg

_________________
http://www.youtube.com/hyperpack

Thank you for sharing.