In Australia, our /6 finished in 1969/70. I was just wondering if anyone could give me a rundown as to what the differences (if any) there are on these later year heads.

G'day, Mate!

I'm gonna leave it to someone else here to give you the specifics, but there were a couple variations after Chrysler went away from spark plug tubes in the mid-seventies ('75, I think). They will all interchange, but the rocker gear is different for a hydraulic cam (eighties).

What I really want to know is, do slant sixes really slant the other way Down Under??!

\6

D/W

_________________

If it ain't broke, fix it!

There is an article section off the home page of this site.
http://www.slantsix.org/articles/articles.htm
There is lots of good info here - some of the head info
you are looking for is in the slant 6 racing manual under
parts and pieces Then also Doug Dutra's article on heads
and the revised combustion chamber.